What is a horseshoe arch?

A horseshoe arch is an arch whose curve covers more than a semicircle, so the arch curves back inwards below its widest point and the opening at the bottom is narrower than in the middle. The shape therefore resembles a horseshoe. Characteristics Springing above the widest point — the arch only begins to close after […]

What is a top-hat beam?

A top-hat beam (also called a top-hat section or omega profile) is a thin-walled, cold-formed steel section whose cross-section looks like a top hat: a flat top with sloping or straight sides and outward-turned flanges. This shape makes the section light yet stiff. Shape and properties Top-hat shape — a raised central part with horizontal […]

What is a hayloft?

A hayloft is the loft or grid of beams above the threshing floor and the cattle stalls in a traditional farmhouse, on which hay and harvest were stored. The hayloft rests on the joists between the timber-frame posts and uses the high space in the barn section. Position and structure Above the threshing floor — […]

What is a hoisting wheel?

A hoisting wheel is a large wheel used, via an axle and a rope, to lift heavy loads. By using the large wheel as a lever, a heavy load can be raised with relatively little force. It is one of the oldest lifting tools. How it works The rope is wound around an axle fixed […]

What is a hoisting hatch?

A hoisting hatch is the closable opening in a facade or roof surface through which goods are hoisted inside with the help of a hoisting beam. On each floor of a warehouse or canal house there is often such a hatch, right below the hoisting beam in the gable top. Structure Hatch opening — a […]

What is a hoisting beam?

A hoisting beam is the horizontal beam that projects from the top of the gable, with a pulley or hook to hoist goods upwards. It is characteristic of Dutch canal houses and warehouses, whose narrow and steep stairs were unsuitable for heavy transport. Why a hoisting beam? The facades of old town houses often lean […]

What is high-tech architecture?

High-tech is an architectural style that emerged in the 1970s, in which a building’s structure, pipes and services are deliberately made visible rather than hidden away. Technology is not a burden but an ornament: steel, glass and pipes are shown with pride. Characteristics Exposed structure — trusses, tie rods and joints remain in view Services […]

What is re-meandering?

Re-meandering is giving a winding, natural course back to a stream or small river that was straightened (canalised) in the past. The watercourse regains its bends, shallows and gentler banks, as it would run naturally. Why re-meander? In the 19th and 20th centuries, many streams were straightened for fast drainage and agriculture. This had drawbacks: […]

What is a herm?

A herm is a rectangular pillar that widens towards the top and is crowned by a sculpted head or bust. The shaft is usually plain and has no arms or legs; only the upper part is worked into a figure. Origin The herm takes its name from the Greek god Hermes. In ancient Greece, such […]

What is repurposing?

Repurposing, also called adaptive reuse, is giving a new function to an existing building that has lost its original purpose. Think of a church becoming homes, a factory converted into lofts, or a water tower turned into offices. The building stays; only its use changes. Why repurpose? Sustainability — keeping the structural shell saves demolition […]