What is a builder’s hoe (houw)?
A builder’s hoe (Dutch ‘houw’) is a hoe-like tool: a blade set at right angles to the handle, used to work the ground, clean out ditches, or mix mortar and concrete. It is a simple but versatile hand tool. Types and use Ground hoe — for loosening and moving soil, or keeping trenches and ditches […]
Timber frame construction: examples
Timber frame construction is a building method in which the structure consists of a frame of timber studs and rails that is sheathed and insulated. Below are some practical examples and variants. Examples and systems Prefabricated wall panels — complete walls are made in the factory, including insulation and sheathing, and quickly assembled on site. […]
Wooden floors: examples
A wooden floor consists of load-bearing joists (the joist layer) with a deck of boards or sheet material on top. Below are practical examples of how wooden floors are built up. Examples of floor build-up Joist layer with floorboards — the classic upper floor: timber joists at centres, with tongue-and-groove floorboards over them. Common in […]
Wood: miscellaneous terms
Wood is a natural, renewable building material that is strong, light and easy to work. Because it is a natural product, every piece behaves a little differently. Below is an overview of miscellaneous terms you meet when working with wood. Species of wood Softwood — such as spruce, pine, larch and Douglas fir; light and […]
What is a hop-dobber?
A hop-dobber is a special, adapted tremie pipe with a float, used to place underwater concrete accurately. The device ensures that the underwater floor slab is placed at the right level and with the right composition. Why underwater concrete? In deep excavations that fill with groundwater, a layer of underwater concrete is often placed first. […]
What is high relief?
High relief (also haut-relief) is sculpture in which the depicted figures project strongly from the background, usually more than half of their natural depth. Parts may even come away completely from the ground, while the whole remains attached to the background. Difference from other reliefs Bas-relief (low relief) — the figures project only slightly from […]
What are dog ears (in leadwork)?
Dog ears (Dutch ‘hondsoren’) are the folded ends of, for example, lead or copper gutters and flashings. By folding the metal, an upstand is formed that closes the corner watertight without the need to cut and do a lot of soldering. What are they for? At a corner in a gutter or flashing you would […]
What is a hollow pantile?
A hollow pantile is a curved, half-round roof tile laid with the hollow (concave) side up, so that rainwater runs down through it. The joint between two hollow tiles is covered by a convex tile laid the other way up. Together they form the hollow-and-cover system. How it works The hollow tile (nun) lies like […]
What is a pile extension piece (‘hoerenjong’)?
A pile extension piece (in Dutch foundation jargon ‘hoerenjong’) is a concrete cap placed on the head of a timber driven pile, which keeps that pile head below ground level and out of sight. The concrete piece effectively extends the pile “invisibly” upwards. Why below ground? Timber piles last for centuries, but only as long […]
Hip rafters: examples
A hip rafter (Dutch ‘hoekkeper’) is the diagonal rafter that runs over the external corner where two roof slopes meet. It forms the sharp arris (hip) of the roof. Below are examples of where hip rafters occur. Examples in practice Hipped roof — the four corners where the roof slopes meet are formed by hip […]
