What is a timber hollow-box panel?

A timber hollow-box panel is a prefabricated building element made of timber ribs with one or two face panels, leaving hollow channels in between. The parts are structurally glued into a stiff, lightweight whole that can serve as a floor or roof. Well-known systems are built from laminated veneer lumber (LVL). The version with face […]

What is combing?

Combing is the drawing of narrow, parallel grooves into a still-fresh layer using a comb or notched trowel. In construction the term is used in two ways: combing mortar or tile adhesive, and combing wet paint to imitate a wood grain. Combing mortar and tile adhesive When tiling, the adhesive is first spread flat onto […]

What is calcium silicate brick?

Calcium silicate brick, also called sand-lime brick, is a man-made masonry unit made from a mixture of sand, slaked lime, and water. The mixture is pressed into moulds and then hardened under high steam pressure in an autoclave. During this process the lime reacts with the sand to form a firm, stone-like material. Calcium silicate […]

What is limestone?

Limestone is a sedimentary rock made up largely of calcium carbonate (CaCO₃), usually in the form of the mineral calcite. The rock forms on the beds of seas and lakes through the accumulation of the calcareous skeletons and shells of organisms, and sometimes through the chemical precipitation of lime from water. Properties Relatively soft — […]

What is a mortar rebate (kalksponning)?

A mortar rebate (Dutch: kalksponning) is a groove cut into the jamb of a window or door frame, at the point where the masonry meets the frame. While the wall is being built, this groove is filled with mortar, creating a firm, sealed connection between the wooden frame and the stone-based material. In Dutch it […]

What is a lime kiln?

A lime kiln is a furnace in which limestone is burnt at high temperature. During burning, carbon dioxide escapes from the stone and quicklime (calcium oxide) is left behind. This burnt lime is the raw material for lime mortar, lime plaster and limewash. The lime kiln is thus a key link in the traditional production […]

What is a kalkmouw (mortar scuttle)?

A kalkmouw is a long, narrow tray that is open at one end and has a handle underneath. It was used to carry lime mortar and hand it to the bricklayer. In the past the kalkmouw was made of wood; later it was also made of steel. It is a classic bricklayer’s tool from the […]

What is lime mortar?

Lime mortar is a mortar in which lime is the binder, mixed with sand and water. It is used for masonry and plastering. Lime mortar is softer, more flexible and more vapour-open than cement mortar, and hardens more slowly. This makes it especially suited to historic and listed work with soft bricks. Properties Vapour-open — […]

What is lime putty?

Lime putty is slaked lime in the form of a thick, butter-like paste. It is made by slaking quicklime with an excess of water and then letting the mixture mature under water for a long time. The longer the lime putty matures, the finer and creamier it becomes. It is the basis for traditional air-lime […]

What is lime?

Lime is one of the oldest building materials: a binder made by burning limestone in a lime kiln. The burnt stone (quicklime) is then slaked with water to become slaked lime. Lime is used as a binder in masonry and plastering mortar and in limewash. It is vapour-open and more flexible than cement, which makes […]