What is a castle farmhouse?
A castle farmhouse is a monumental farmhouse built to look like a small castle or manor house: often symmetrical, with mock turrets, a moat or a gatehouse, either erected by wealthy farmers or grown out of a former castle estate. Characteristics The castle farmhouse blends the practical needs of a working farm with the grandeur […]
What is projecting (relief) brickwork?
Projecting or relief brickwork (Dutch “kartelwerk”) is decorative brickwork in which bricks, or whole courses, alternately project forward, for example by about 20 mm, and recede, creating a blocked or toothed relief pattern across the facade. Characteristics Instead of a flat wall face, projecting brickwork plays with depth. Some bricks are set slightly proud of […]
What is a caryatid?
A caryatid is a load-bearing column or support carved in the form of a female figure that carries an entablature in place of an ordinary column. Characteristics A caryatid combines sculpture and structure. Rather than a plain shaft, the support takes the shape of a standing woman, usually draped, who appears to bear the weight […]
What is a cartouche?
A cartouche is an ornament shaped like a curling leaf or a scroll of parchment, often with a framed panel in the centre for an inscription, a coat of arms or a date. Characteristics The cartouche imitates a rolled or curling sheet, with its edges turning inward as if the material were stiff parchment or […]
What is a timber brace (korbel)?
A timber brace (Dutch “karbeel” or “korbeel”) is a short, angled timber strut set between a vertical post and a horizontal beam or plate, stiffening the corner and shortening the beam’s span. Characteristics A brace bridges the right angle where a post meets a beam, forming a small triangle in the corner. That triangle is […]
What is a roof development drawing?
A roof development drawing is a geometric development, or unfolding, of a roof used to find the true lengths and angles of the roof surfaces, hips and valleys, which appear foreshortened in an ordinary elevation. Characteristics On a normal plan or elevation, a sloping roof surface is seen at an angle, so its measurements look […]
What is a roof truss?
A roof truss is a load-bearing, usually triangular assembly of timber or steel that stands in the plane of the roof, takes up the roof loads and transfers them into the load-bearing walls. Characteristics The triangle is at the heart of the truss because it is a rigid, stable shape that resists deformation. Within that […]
What is a roof plan?
A roof plan is a construction drawing, a top view of the roof, that sets out the layout of the roof structure: the position of the trusses and rafters, the purlins, the ridge, the valleys and hips, and the wall plates. Characteristics A roof plan looks down on the roof from directly above and records […]
What is a capital in architecture?
A capital is the topmost, often decorated part, or head, of a column, pilaster or pier. It forms the transition between the shaft and what it carries, such as an architrave or an arch, and helps spread the load. Characteristics The capital sits where the vertical shaft meets the horizontal or curved element above it. […]
What is a slate cutting iron?
A slate cutting iron is a slater’s tool: a thin steel strip with a long, sharp spike in the middle, driven into the roof boarding so the strip acts as a small anvil for cutting slates to size and punching their fixing holes. Characteristics The tool looks deceptively simple, but it turns an ordinary roof […]
