What is a kubbestijl?
A kubbestijl is a timber post set vertically into the ground to strengthen a lock or quay wall. It is a term from Dutch hydraulic engineering, used above all in combination with wulf walls: vertically built trough vaults found in lock chamber walls and quay structures. The word kubbe goes back to a part of […]
What is a krukhuis farmhouse?
A krukhuis farmhouse is a Dutch farm type in which the living quarters are extended out to one side. Seen from above the building gains a crank — kruk in Dutch. Where the living quarters are extended to both sides, the type is called a T-house farmstead. Where the type belongs The krukhuis belongs on […]
What is a door handle?
A door handle is the lever or knob used to operate the latch of a door or window. Turning the lever withdraws the latch bolt from the striking plate so the door opens. Let go and a spring pushes the latch back out. How it goes together The spindle — a square bar running through […]
What is a cross glazing bar?
A cross glazing bar is a bar arrangement that divides a window into four or more panes. The bars run crosswise through the sash and hold each individual pane in place. In Dutch this is a kruisroede. Why glazing bars exist Glazing bars did not begin as decoration but out of necessity. As long as […]
What is a rib vault?
A rib vault is a cross vault in which stone ribs run along the diagonals and carry the vault. Where a groin vault has only a groin — the line where two vault surfaces meet — the rib vault turns that diagonal into a structural member in its own right. It is the vault of […]
What is a Boulet roof tile?
A Boulet roof tile is a clay tile with strongly raised edges for better water discharge, laid with a half-tile offset in each successive course. In the Netherlands it is known as a kruispan, and regionally as an Echterpan. Origin At the end of the nineteenth century the French manufacturer Boulet of Paris introduced a […]
What is a cruciform column?
A cruciform column is a steel column whose cross-section has the shape of a cross. Such a section is made, for example, by welding two T-sections to the web of an I-section. The aim is to reduce the column’s tendency to buckle. Why the cross shape? A slender column rarely fails by crushing the steel; […]
What is a cruciform church?
A cruciform church is a church whose plan takes the shape of a cross. The shape arises because the long nave is cut through by a transept. The point where the two meet is the crossing. The parts Nave — the long axis, where the congregation sits Transept — the crossing arm, often with its […]
What is a marking gauge?
A marking gauge is a tool for scribing a line parallel to an edge of the workpiece. It consists of a stock (a block with a hole) through which a stem runs, with a sharp pin or cutter at the end. Lock the stock at the required distance, run it along the edge, and you […]
What is an interlaced arch frieze?
An interlaced arch frieze is an arch frieze whose round arches cut across each other, producing crossing arches. The motif belongs above all to Romanesque architecture, with Normandy as a well-known centre. In Dutch it is called a kruisboogfries. How it is built up An ordinary round-arch frieze consists of a row of small arches […]
