What is laser cutting?

Laser cutting is a thermal cutting process in which a tightly focused laser beam locally melts or vaporises the material while an assist gas blows the melt out of the cut. The beam follows a computer-controlled path, so the part comes out of the sheet exactly as drawn. Because the heat is put into a […]

What is a 3D laser scanner?

A 3D laser scanner is a survey instrument that uses a laser beam to record hundreds of thousands to millions of points on a building or site in a short time, storing them as a point cloud: a set of points with x, y and z coordinates, often supplemented with colour information from a built-in […]

What is larvikite?

Larvikite is a light to dark grey igneous rock from the area around Larvik in southern Norway, containing large feldspar crystals that flash blue-silver when light strikes them at the right angle. That shimmer comes from light refraction within the fine lamellae of the feldspar — the effect is called schiller, or labradorescence. Trade names […]

What is a lantern in architecture?

A lantern is a glazed structure set on the top of a dome, a roof or a tower, intended to admit daylight and sometimes to exhaust air. It is a small, self-contained construction — circular, octagonal or square — with a roof of its own. Types Dome lantern — sits on the oculus, the opening […]

What is a long elevation?

A long elevation (Dutch: langsgevel) is the long side of a rectangular building, running parallel to the ridge. With a pitched roof it is also the eaves elevation, because the gutter and the wall plate sit along it. Its counterpart is the gable end, at right angles to the ridge, which carries the gable in […]

What is a longitudinal frame?

A longitudinal frame (Dutch: langsgebint) is a timber frame whose posts stand in the length direction of the building: more than two posts connected by a continuous longitudinal beam, with wind braces at the top between post and beam. It therefore runs parallel to the ridge, where a transverse frame stands at right angles to […]

What is a longhouse farmhouse?

A longhouse farmhouse (Dutch: langhuisboerderij) is a farmhouse in which the dwelling and the working end lie in line with one another, under a single continuous pitched roof with one ridge. It is the oldest and most widespread basic type of the Dutch farmhouse: quite literally a long house in which people, livestock and harvest […]

What is a long-facade farmhouse?

A long-facade farmhouse (Dutch: langgevelboerderij) is a farmhouse type in which dwelling, byre and barn lie one behind the other under a single continuous ridge, with every entrance placed in the same long elevation. The name refers to precisely that: the eaves elevation is the access side. Characteristics A long, narrow plan, one storey with […]