Installing a Rainwater Collection System: From Rain Barrel to Rainwater Tank

Installing a rainwater collection system? Learn how to do it right, what materials you need, common mistakes to avoid and what to check beforehand.
What is a slate hammer?
A slate hammer, or slater’s hammer, is the combined hand tool with which a slater trims slates to size, punches holes for the fixings, and drives or draws nails. It is not an ordinary hammer but four tools in one, made for working on a roof plane where there is no bench beside you. The […]
What is a slate hook?
A slate hook is the metal hook used to fix a slate on the roof. The hook is driven into the boarding or clipped behind the batten, and its turned-up foot passes over the tail of the slate so it cannot lift in the wind or slide down. In hook slating the slate is therefore […]
What is a slate roof?
A slate roof is a pitched roof covered with slates: thin, flat plates fixed in overlapping courses across the roof plane. Because each slate laps those below it, the roof is watertight without the fixings ever sitting in the path of the water. Slate was for centuries the roofing material of churches, castles, towers and […]
What is the bed face of a brick?
The bed face is the largest face of a masonry unit: the face on which the brick normally sits on the course below. It transfers the weight of the masonry above and rests on the mortar bed. An ordinary brick has three kinds of face, and the names recur on every working drawing: Bed face […]
What is an alloy?
An alloy is a metal made up of a base metal together with one or more deliberately added elements, so that the whole gains properties the pure metal does not have: more strength, better corrosion resistance, better formability or a lower melting point. Practically every metal you handle on a building site is an alloy. […]
What is a legakker?
A legakker is a long, narrow strip of land left standing between the dredged channels of Dutch lowland peat extraction. The wet peat was laid out on that strip to dry — hence the name, literally ‘laying field’ — after which the dried mass was cut into turves and shipped to the cities by barge. […]
What is clay plaster?
Clay plaster, also called earth plaster, is a plaster of loam, sand and usually a fibre such as straw, hemp or cellulose, applied to internal walls and ceilings. The coat does not set chemically but dries out; the binder is the clay naturally present in the loam. That makes it fundamentally different from gypsum- or […]
What is an adobe block?
An adobe block is an unfired block of loam, usually mixed with sand and often with straw or another fibre, formed in a mould and then dried in air and sun. The Spanish word adobe — from the Arabic al-ṭūb, ‘the brick’ — is the internationally used name for what in earth building is simply […]
What is loam?
Loam is a natural mixture of clay, silt and sand, in which the clay fraction acts as the binder while sand and silt form the skeleton. It is not a manufactured product but a soil type — and at the same time the oldest building material in the world, dug almost anywhere straight out of […]
