What is the light transmittance factor (LT)?
The light transmittance factor is the proportion of visible daylight that passes through a glazing unit. It is written as a number between 0 and 1 or as a percentage; in European product data it appears as τv (tau-v) or LT. The Dutch term is lichttoetredingsfactor, abbreviated LTA. An LT of 0.78 therefore means: 78 […]
What is a continuous rooflight?
A continuous rooflight is an elongated daylight structure in a roof: a framework of aluminium or steel with glass or plastic infills that brings light into the space below over a considerable length. Where a dome rooflight lights one point, a continuous rooflight lights a strip or a whole room. You find them over industrial […]
What is a dome rooflight?
A dome rooflight is a curved, translucent plastic cover set on a flat or shallow-pitched roof to bring daylight into the space below. It almost always sits on an upstand — the kerb — which lifts the dome above the water level of the roof plane. The curved form has two practical reasons: it is […]
What is a light hood (lichtkap)?
The Dutch term lichtkap carries more than one meaning. In roofing it is a short rooflight: a raised daylight opening in a roof or wall. In lighting it is the shade that gathers, directs or screens the light from a lamp. And in older building literature “lichtkap” is sometimes used as a synonym for the […]
What is light transmission?
Light transmission is the extent to which a material lets visible light through. It is expressed as the τv value (tau-v): the proportion of incident visible light that emerges on the other side, usually given as a percentage or as a number between 0 and 1. The distinction from “transparent” matters. Milky white polycarbonate can […]
What is a clerestory?
The clerestory is the windowed wall zone in the nave of a church, above the roofs of the aisles. Because the nave is taller than the aisles, a stretch of wall is left clear there and can hold windows — the principal light source of the nave. The Latin-derived form is clerestorium; in Dutch it […]
What is lightweight concrete?
Lightweight concrete is concrete in which the usual gravel has been replaced by lightweight aggregates such as expanded clay, pumice, lava or perlite. The pores in those grains make the concrete considerably lighter than ordinary concrete and give it better thermal performance — at the cost of compressive strength. Under the concrete standard EN 206, […]
What are Lewis® dovetail floor sheets?
Dovetail floor sheets are thin steel sheets with a dovetail-shaped profile that serve both as permanent formwork and as reinforcement for a thin concrete floor. They stay in the structure after the pour: the dovetail form keys into the concrete and provides both bond and stiffness. Lewis® is the best known brand name for this […]
What is the life cycle of a building?
The life cycle of a building or building product covers every phase of its existence: from extraction of the raw material, through manufacture, construction, use and maintenance, to demolition and processing of the material released. Looking only at build cost, or only at energy use, shows just one slice of that whole. The concept matters […]
What is a hanging beam (leugenbalk)?
A hanging beam is an intermediate beam in a timber frame that is carried by no wall, corbel, wall post or other beam, but hangs from the structure above it. It looks like an ordinary tie beam, but it does not shed its load in the usual way — hence the Dutch name leugenbalk, literally […]
