What is the MPG (environmental performance of buildings)?
The MilieuPrestatie Gebouwen (MPG) is a legally required figure in the Netherlands that expresses how large the environmental impact of all the materials and services in a building is over its whole service life. The lower the result, the smaller the impact. It is effectively the Dutch equivalent of an embodied-impact assessment. The MPG looks […]
What is a mood board?
A mood board is an organised collection of images, colours, material samples and keywords on a single surface, used to fix the intended atmosphere and direction of a design before anything is drawn or bought. It is a communication tool: it makes visible what is hard to convey in words. In building and interior design […]
What is system building?
System building — also called assembly building or offsite construction — is a method in which the components are made in a factory and on site are only lifted, positioned and connected. The building site turns from a workshop into an assembly yard. It is the counterpart of traditional construction, where brick is laid on […]
What are monk and nun tiles?
Monk and nun tiles are a matched pair of half-round roof tiles: the nun is the wider under-tile laid with its hollow side facing up, and the monk is the narrower over-tile laid convex side up, covering the joints between them. Together they form one of Europe’s oldest roof coverings, descended directly from the Roman […]
What are rebar tying pliers?
Rebar tying pliers are a special type of pliers with which steel fixers twist tie wire around crossing reinforcing bars and pull it tight. In Dutch and German they are named after Joseph Monier — moniertang, Monierzange — the French gardener who stood at the origin of reinforced concrete; for a long time steel fixing […]
What is a bending moment diagram?
A bending moment diagram is the graphical representation of the bending moment along the length of a beam, joist or column. The horizontal axis gives the position along the member, the vertical axis the magnitude of the moment. At a glance you can see where the structure is worked hardest and how large the moment […]
What is a moment?
A moment is the turning or bending effect of a force about a point: the magnitude of the force multiplied by the perpendicular distance to that point. As a formula: M = F × a. The unit is the newton metre (Nm), in building work usually the kilonewton metre (kNm). The lever arm matters at […]
What is a dished channel?
A dished channel is a shallow, saucer-shaped gutter formed in a paved surface that collects surface water and leads it to a gully or other outfall. You find them along roads, on car parks, on service yards, in driveways and increasingly in gardens too. The Dutch term is molgoot. What sets it apart from other […]
What is a sledgehammer?
A sledgehammer is a heavy hammer with a solid, usually square head and two flat striking faces, designed to deliver a large amount of energy in a single blow. Unlike a claw hammer it has no claw and no pein: all the weight sits in the head. The Dutch term is moker. The practical distinction: […]
What is stove enamelling?
Stove enamelling is the curing of a paint or coating on metal at elevated temperature in a purpose-built oven. The heat lets the coating flow out and cross-link chemically into a hard, closed film that adheres far better and is much more wear-resistant than a layer dried at room temperature. The Dutch and German names […]
