What is plastering?

Plastering is applying a coat of plaster to walls and ceilings to give a smooth, flat surface ready for painting or papering; indoors this is usually gypsum plaster. It is done by a plasterer, by hand or with a spray machine followed by trowelling. In the Netherlands the work is called stuc or stucwerk, the plasterer a stukadoor, and the verb stuken or stucen. Note that the Dutch “stuc” means ordinary smooth plastering, not the exterior render that English speakers call stucco.

Types and differences

Application

  1. Assess the background. Smooth, non-absorbent concrete needs a bonding primer with grit first. Highly absorbent backgrounds such as aircrete or calcium silicate blocks are primed to control suction. Remove loose material, grease and dust.
  2. Fit corner beads. On external corners and window reveals, beads give straight, impact-resistant edges.
  3. Keep within the stated thickness. A skim on concrete is a few millimetres; a gypsum plaster on masonry is usually just over a centimetre. Minimum and maximum thicknesses are on the bag or data sheet.
  4. No standard gypsum in wet zones. In a shower or on splash-prone walls, use a moisture-resistant system such as a cement-based render or tiling on a suitable board.
  5. Let it dry properly. Fresh plaster is dark; it is dry when the colour is evenly pale. Ventilate, but avoid fierce heating, which can cause cracking.
  6. Seal before painting. Emulsion straight onto new plaster goes patchy and adheres poorly. Apply a mist coat or primer first.
Which preparation suits the background?Smooth, non-absorbent concrete→Bonding primer with grit firstHighly absorbent background(aircrete, calcium silicate blocks)→Prime to control suctionShower or splash-prone wall (wetzone)→No standard gypsum:moisture-resistant system such ascement-based render or tiling on asuitable board
Choices per background and location as described in this article on gypsum plastering.

Common mistake: painting plaster that is still damp. The paint flakes or stains and the wall has to be redone.

Related terms

Want to know more about building terms? Visit our knowledge base at fredsdiyplans.com.

Leave a Reply

Your email address will not be published. Required fields are marked *