The riser height (usually just “the rise”) is the vertical distance between two consecutive treads on a staircase: how far you have to step up each time. Its horizontal counterpart is the going, the usable depth of a tread.

Rise and going together decide whether a staircase walks pleasantly or whether you feel it every day. Steps that are too high cost effort; steps that are too low force an unnatural rhythm.

How to calculate it

The rise follows from the total height to be climbed divided by the number of risers — and that number is always a whole number.

Worked example: a floor-to-floor height of 2,800 mm (finished floor level to finished floor level).

A stair with 15 risers has 14 goings: the top “step” is the upper floor itself.

Watch out: always work to finished floor levels. Measuring up before the screed and floor finish are in place gives you an odd step at the top or bottom — a classic trip hazard.

Limits and rules of thumb

For a private stair in a dwelling, Approved Document K in England and Wales sets a maximum rise of 220 mm, a minimum going of 220 mm and a maximum pitch of 42 degrees. Other jurisdictions set their own values, so always check the code that applies to you.

Private stair limits in England and Wales220 mmMaximum rise220 mmMinimum going42 degreesMaximum pitch
Limits for a private stair in a dwelling under Approved Document K in England and Wales. Other jurisdictions set their own values, so always check the code that applies to you.

Alongside that sits the classic step formula:

> 2 x rise + 1 x going = roughly 550 to 700 mm

A stair with a 185 mm rise and a 250 mm going gives 620 mm — comfortably in range.

Practical points

Related terms

Learn more about building terms in our knowledge base at fredsdiyplans.com.

Leave a Reply

Your email address will not be published. Required fields are marked *