A nosing is the part of a stair tread that projects beyond the face of the riser. Seen from above, the nosing overlaps the tread below. The word is also used for two other components: the hanging nib on the back of a roof tile, and a moulded strip on the outer fascia board of a gutter.

The stair nosing

The nosing enlarges the walking surface without lengthening the staircase. Your foot rests partly on it, while the going — the horizontal dimension of the tread itself — stays the same. A common projection is around 25 to 40 mm. On a steep stair a smaller nosing works better: a large overhang increases the chance of catching a heel on the way down. Beneath the nosing there is often a nosing batten closing the junction with the riser.

The nib of a roof tile

On the underside of virtually every roof tile there is a projecting nib. It hooks over the batten and holds the tile in place. When tiling, every tile must actually drop with its nib behind the batten; a tile resting on top of the batten instead of hooking behind it will slide in a gale. Displaced tiles and moss growth are the first things to check when there is a leak near the ridge or the eaves.

The fascia moulding

The outer fascia board of a gutter sometimes carries a moulded strip, also called a nosing. It gives the gutter a finished edge and acts as a drip.

Points to watch

Related terms

Want to know more about building terms? Visit our knowledge base at fredsdiyplans.com.

Leave a Reply

Your email address will not be published. Required fields are marked *