Here is how you build a rain garden, or wadi, in your garden: dig a sunken planting bed 20 to 50 cm deep with gently sloping sides (1:2 batter), lead your downpipe to it with an open channel, and make sure the soil drains the water away within an hour. You work out the right size with this rule of thumb: the heaviest downpour in mm x the roof area draining into it in m². Reckon on 40 mm for a heavy downpour. With 30 m² of roof that means 30 x 40 = 1,200 litres (1.2 m³) of storage. A wadi of 1 m² at 20 cm deep holds roughly 200 litres, so for 1,200 litres you need around 6 m² of wadi. Costs in 2026 run between 25 and 75 euros per m², and many local councils and water authorities offer a grant for disconnecting your downpipe.
In this guide you will read exactly what a wadi is, how to calculate the size and depth, how to test your soil’s permeability yourself, which layers you build up, which plants survive both wet and dry, what it costs and how to maintain it. No vague waffle, just concrete numbers and steps.
What exactly is a wadi?
Wadi comes from the Dutch term “Water Afvoer Door Infiltratie”, which means water drainage through infiltration. It is a shallow, sunken patch of garden planted with grasses and moisture-loving plants. In English it is often simply called a rain garden.
In dry weather the wadi just sits dry and you see a green planting bed. When it rains, the water flows in off your roof, sits there for a while, and then slowly soaks into the soil. That slow soaking is called infiltration.
The difference with a pond: a pond holds water, a wadi lets it pass through into the ground. That way you top up the groundwater and take pressure off the sewer.
A wadi is the classic move for a climate-resilient garden: a garden that copes with both cloudbursts and longer dry spells.
Why build a wadi?
- Less flooding. The rainwater does not disappear into the sewer but into your own soil, which lowers the risk of a waterlogged garden or a damp crawl space.
- Topping up groundwater. Good against drying out in dry summers.
- More biodiversity. A moist planting bed attracts insects, butterflies and birds.
- Relieving the sewer. During cloudbursts the sewer overflows less quickly.
- Often a grant. Disconnecting the downpipe is financially rewarded in many places (see further down).
How big and how deep should a wadi be?
The size depends on how much water you want to collect. And that in turn depends on two things: how much roof drains into the wadi, and how heavy a downpour you want to be able to store.
The rule of thumb for the amount of water:
Draining roof area (m²) x rain in mm = litres of water to store
A millimetre of rain is exactly 1 litre per square metre. For a temperate climate, reckon on a heavy downpour of 40 mm. If you want to cope with extreme downpours, go towards 60 to 70 mm.
Worked example: wadi size
Say you drain the water from one downpipe, and that pipe takes half of a sloping roof of 60 m². Then 30 m² of roof drains into your wadi.
| Step | Calculation | Result |
|---|---|---|
| Draining roof | 30 m² | 30 m² |
| Rain in mm | 40 mm (heavy downpour) | 40 l/m² |
| Water to store | 30 x 40 | 1,200 litres (1.2 m³) |
| Storage capacity per m² of wadi (at 20 cm deep) | ~200 litres | 200 l/m² |
| Wadi area needed | 1,200 / 200 | ~6 m² |
Another common rule of thumb: make the wadi 5 to 10% of the area you want to drain. With 30 m² of roof that gives 1.5 to 3 m² of sunken surface. But because a wadi also has depth, that ties in nicely with the litre sum above.
Depth and batter
The depth is usually between 20 and 50 cm. In a small garden 20 to 30 cm is often enough.
The sloping sides matter, the batter. The rule is 1:2 batter: the slope is twice as long as the wadi is deep.
| Wadi depth | Slope length per side | Minimum outer dimensions |
|---|---|---|
| 30 cm | 60 cm | approx. 1.2 x 1.2 m |
| 50 cm | 100 cm | approx. 2 x 2 m |
Gentle sides are not only safer (see the FAQ about children), they also stop the walls from collapsing and make mowing easier.
How do I test whether my soil is suitable? (infiltration test)
Not every soil lets water through quickly. On sand it goes fast, on clay very slowly. So always test it yourself first. This is called the bucket test or infiltration test.
- Dig a hole about 30 cm deep at the planned spot.
- Fill the hole completely with water.
- Time how long it takes for the water to drain away.
| Drain time | Permeability | Suitable? |
|---|---|---|
| Within 15 minutes | Good | Yes, ideal |
| 15 to 60 minutes | Average | Yes, fine |
| More than 60 minutes | Poor | No, extra measures needed |
For comparison: coarse sand lets through around 500 litres per hour per m², clay only 0.5 litre. That difference is enormous.
Do the test in a few spots and preferably not right after a wet spell, because then the ground is already saturated and you get a skewed picture.
Two extra conditions:
- The groundwater must sit at least 1.5 m below ground level. If it is higher, the wadi can never drain properly.
- Keep at least 0.8 m clearance from the foundation of your house and 2 m from large trees.
The build-up of a wadi: which layers?
The build-up depends on your soil type. On sand you are quickly done, on clay you have to do more.
Sandy soil (good permeability)
Simple: dig out, then backfill with a layer of garden soil mixed with compost, and a layer of mulch on top.
From top to bottom:
- Top layer of mulch: fallen leaves, bark or wood chips. Holds moisture and suppresses weeds.
- Topsoil with compost: where the plants root.
- The existing sandy soil does the infiltration work.
Clay or loam soil (poor permeability)
Here you dig deeper and build in an infiltration layer:
- Dig 15 cm deeper than the desired wadi base.
- Lay geotextile (root fabric or filter fabric) on the bottom and against the walls. This stops soil from silting up the infiltration layer.
- Fill with gravel, lava stone or fired clay pellets as a buffer and drainage layer.
- Wrap the whole thing in geotextile so it stays clean.
- Top off with topsoil plus compost and a top layer of mulch.
With really heavy clay you can build a deeper soakaway under the wadi, 1 to 2 m deep and about 1 m wide, filled with gravel. That way you still give the water a route downwards.
Don’t forget the overflow
Always make an overflow: a lower point on the edge where the water can safely go during an extreme downpour, for example to a deeper part of the garden. That stops a full wadi from running towards your house.
Step-by-step: building a wadi in 7 steps
- Calculate the size. Use the sum roof area x 40 mm and divide by ~200 litres per m² (at 20 cm deep).
- Do the infiltration test. Dig a hole 30 cm deep, fill it with water, time the drain.
- Choose the spot. Low in the garden, at least 0.8 m from the house, away from large trees, at a naturally low point.
- Dig out the wadi. 20 to 50 cm deep with a 1:2 batter (gentle sides). On clay, 15 cm extra for the infiltration layer.
- Build up the layers. On clay, first geotextile plus gravel, then topsoil with compost, then mulch. On sand, just topsoil plus compost plus mulch.
- Disconnect the downpipe. Saw the downpipe through above the desired height and lead the water to the wadi via an open channel or gravel strip. Make an overflow.
- Plant and mulch. Put in moisture-loving plants, cover the soil with mulch and water for the first few weeks until everything takes.
How do I disconnect the downpipe?
Disconnecting means you no longer send rainwater to the sewer, but to your garden.
- Saw the downpipe through about 20 to 30 cm above the ground.
- Fit a bend or an open channel that leads the water towards the wadi.
- Finish the strip between pipe and wadi with gravel or a channel, so no gully washes out.
- Seal the opening to the sewer neatly with a stopper, so no sewer smell comes up.
Watch out with combined sewers: in some areas rules apply or you have to report the disconnection. Check this quickly with your council, there is often a grant attached too.
Wadi versus soakaway crate versus gravel soakaway
A wadi is not the only way to infiltrate rainwater. These are the three options at a glance.
| System | What is it? | Visible? | Storage | Cost 2026 |
|---|---|---|---|---|
| Wadi | Planted, sunken bed that collects water above ground | Yes, a green hollow | ~200 l per m² at 20 cm deep | 25-75 euros/m² |
| Soakaway crate | Underground plastic crate that collects and lets water through | No, hidden | 200 or 500 litres per crate | 200 l crate incl. fabric from ~400 euros; 500 l crate from ~150 euros each |
| Gravel soakaway | Underground hole filled with gravel and geotextile | No, hidden | ~60-80 litres effective per 200 l of volume | 200 l gravel soakaway incl. fabric approx. 60-80 euros |
When do you choose what?
- Wadi: when you have the space and want to make the garden prettier and more biodiverse. Cheap on materials, creates habitat.
- Soakaway crate: when you do not want to sacrifice space above ground, for example under a patio or lawn. For a soakaway crate in the garden you reckon per crate with the sum m² of roof x 40 mm = litres needed.
- Gravel soakaway: a budget version of the crate for smaller amounts of water.
You can also combine them: a wadi with a soakaway crate underneath for extra storage on poor soil.
Which plants do you choose for a wadi?
The trick: the plants have to cope with both wet feet (after a downpour) and drought (in summer). The base of the wadi is sometimes flooded, the sloping sides are drier. Spread your plants accordingly.
| Plant | Latin name | Position in the wadi |
|---|---|---|
| Purple loosestrife | Lythrum salicaria | Base, wettest part |
| Meadowsweet | Filipendula ulmaria | Base and slope |
| Marsh marigold | Caltha palustris | Wettest part |
| Water forget-me-not | Myosotis scorpioides | Wettest part |
| Sedge | Carex (various species) | Base and slope |
| Common valerian | Valeriana officinalis | Slope, drier zone |
| Bulrush | Typha (small species) | Base, larger wadis only |
| Water mint | Mentha aquatica | Base |
Combine with ornamental grasses on the drier edges for a natural look. If you want to keep it simple, you can also just sow the wadi with a moisture-loving grass and wildflower mix.
What does building a wadi cost in 2026?
The material costs are relatively low, the biggest item is the digging (doing it yourself saves a lot).
| System/item | Price 2026 |
|---|---|
| Simple wadi (sandy soil) | 25-40 euros/m² |
| Wadi with drainage layer (clay soil) | 40-60 euros/m² |
| Combination of wadi plus soakaway crate | 55-75 euros/m² |
| Preparation (setting out, soil removal) | 5-10 euros/m² |
| Maintenance | 2-5 euros/m² per year |
| Contingency | 10-15% of the total |
So for a wadi of 6 m² on sandy soil, reckon roughly on 150 to 240 euros of materials, plus possibly soil removal. If you do it entirely yourself, it stays at the bottom of that range.
Maintaining a wadi
A wadi is low maintenance, but not maintenance-free.
- Mowing: mow the grasses along with your lawn, or leave the wildflower mix standing and mow it 1 to 2 times a year.
- Cutting back: cut the perennials back at the end of winter.
- Clearing leaves: remove excess leaves in autumn, otherwise the soil silts up and water infiltrates worse.
- Checking permeability: if water stands for a long time after a downpour (longer than a day), the soil is silting up. Then loosen the top layer gently or replace the top few centimetres.
- Weeds: especially in the first year, keep aggressive weeds out until the planting is dense.
Grants for disconnecting and climate adaptation
Many water authorities and councils reward disconnecting your downpipe and building a wadi. In the Netherlands, about half the water authorities have a scheme. Examples for 2026:
- Aa en Maas water authority (NL): a reward per m² of disconnected roof, which can run up to 5,000 euros for green roofs and disconnecting.
- City of The Hague (NL): up to 50% of costs reimbursed, up to 500 euros per 1,000 litres of rainwater collected (total budget 200,000 euros in 2026).
- City of Enschede (NL): 10 euros per m² of disconnected roof, with a maximum of 2,000 euros.
- City of Zwolle (NL): scheme from 1 January 2026, budget 114,000 euros.
In the UK, support often runs through water company schemes and SuDS rules, and varies by region. Always check your own council and water authority, because schemes and amounts differ a lot by region. Search for “rainwater disconnection grant” plus your town name.
Frequently asked questions about building a wadi
Is a wadi safe for children?
Yes, as long as you use gentle batters (1:2) and make the wadi at most 20 to 30 cm deep in a family garden. A wadi also sits dry most of the year and drains within a few hours to a day after a downpour. Unlike a pond, there is no permanent pool of water. Still, keep an eye on young children during and just after a cloudburst.
How long does the water stay in a wadi?
With suitable soil (a drain time under 60 minutes in the infiltration test) the wadi is usually empty within a few hours to a day at most. If the water stays for days, your soil is too poorly permeable or the groundwater sits too high. Then you have to add an infiltration layer or crate.
Can a wadi go on clay soil?
Yes, but then you have to dig deeper and put in an infiltration layer of gravel between geotextile, or set a soakaway crate underneath. On heavy clay with high groundwater a wadi alone may not be enough, and a soakaway crate with drainage is often the better choice.
How big does my wadi need to be at a minimum?
Use the formula: draining roof area x 40 mm = litres, divided by ~200 litres per m² (at 20 cm depth). With 30 m² of roof you get about 6 m². No room? Then make the wadi deeper (50 cm stores more per m²) or combine it with a soakaway crate.
Does a wadi attract mosquitoes?
Barely. A wadi drains quickly and holds no standing water, whereas mosquitoes need several days of standing water to hatch. A wadi that dries out within a day gives mosquitoes no chance.
Am I allowed to just disconnect my downpipe?
In most cases yes, but with combined sewers rules sometimes apply and in some areas you have to report it. Often there is even a grant attached. Check with your council or water authority before you start sawing.
Building plans and guides
Building a wadi works best with a solid plan on paper: dimensions, batter and drainage worked out neatly before the spade goes in the ground. Take a look at the complete building plans package at fredsdiyplans.com, with thousands of drawings for every DIY project.
