A swimming pool in your garden sounds appealing, but the purchase price (€15,000 to €50,000), annual maintenance (€1,500 to €3,000 for chlorine, energy and filters) and the concrete look do not suit every garden. A natural swimming pond offers the same swimming enjoyment, but with natural water purification by plants and bacteria instead of chemicals. The cost of a professionally built swimming pond ranges from €10,000 to €40,000, but building one yourself is possible from as little as €1,500 to €5,000, depending on the size and type. In this article, you will learn which type of swimming pond suits your garden, what you need and how to get started step by step.
DIY vs. hiring a professional: how much do you save?
| DIY | Hiring a professional | |
|---|---|---|
| Small swimming pond (15-20 m2) | €1,500 – €3,000 | €7,500 – €15,000 |
| Medium swimming pond (25-40 m2) | €3,000 – €5,000 | €15,000 – €30,000 |
| Large swimming pond (50+ m2) | €5,000 – €10,000 | €25,000 – €40,000+ |
| Labour time (DIY) | 3-6 weeks (weekends) | 2-4 weeks |
| Savings with DIY | 60-75% | – |
| Annual maintenance | €100 – €300 | €300 – €800 |
The savings with DIY are significant, but it is a major project. Expect 3 to 6 weekends of digging, laying liner, adding substrate and planting. The earthworks are the hardest part. For a 30 m2 pond with a depth of 1.50 metres, you will be moving 20 to 30 m3 of soil.
Swimming pond vs. swimming pool: an honest comparison
| Property | Swimming pond | Conventional swimming pool |
|---|---|---|
| Construction costs | €1,500 – €40,000 | €15,000 – €50,000 |
| Annual maintenance | €100 – €300 | €1,500 – €3,000 |
| Chemicals | None (natural purification) | Chlorine, pH regulators, algaecides |
| Energy consumption | Low (small pump) | High (filter pump, heating) |
| Appearance | Natural, fits into garden design | Sleek, artificial |
| Biodiversity | Attracts birds, dragonflies, frogs | None |
| Swimming season | May – September (unheated) | March – October (heated) |
| Water temperature | 18-24 degrees C (summer) | 26-30 degrees C (heated) |
| Liner lifespan | 30+ years (EPDM) | 10-15 years (liner) |
| Permit required | Sometimes (depends on local regulations) | Often yes |
The 5 types of swimming ponds
Swimming ponds are classified into 5 types, from fully natural to almost a swimming pool. Each type has a different balance between nature and technology.
Type 1: Ecological swimming pond
The most natural variant. No pump, no filter, no technology. Water purification is handled entirely by aquatic plants and microorganisms.
- Plant zone: at least 50-60% of the total area
- Technology: none
- Maintenance: low, but the water is not always crystal clear
- DIY costs: €1,500 – €3,000
- Suitable for: large gardens, nature lovers
Type 2: Classic swimming pond
The most popular type. A swimming zone and a separate plant filter, divided by a partition wall. A small pump circulates the water through the filter zone.
- Plant zone: approximately 30-40% of the total area
- Technology: small circulation pump
- Maintenance: moderate, reasonably clear water
- DIY costs: €2,500 – €5,000
- Suitable for: medium-sized gardens, the best compromise between nature and clarity
Type 3: Hybrid swimming pond
A combination of plant filter and technical filters (skimmer, UV-C lamp). The plants do part of the work, the technology does the rest.
- Plant zone: approximately 20-30% of the total area
- Technology: circulation pump, skimmer, optionally UV-C
- Maintenance: moderate, clear water
- DIY costs: €3,500 – €7,000
- Suitable for: those who want clear water with a natural look
Type 4: Biopool
Looks like a swimming pool but uses biological filter technology instead of chlorine. No visible plants in the water; the filter is hidden under a wooden deck or in a separate room.
- Plant zone: no visible plants (biofilm filter)
- Technology: extensive filter system, pumps, optionally heating
- Maintenance: higher, comparable to a swimming pool
- DIY costs: €5,000 – €10,000
- Suitable for: those who want the pool experience without chemicals
Type 5: Technical biopool
The most advanced variant. Fully technically filtered with biofilm, phosphate removal and ionisation. Algae-free walls and floor, crystal-clear water.
- Plant zone: none
- Technology: fully technical, professional installation required
- Maintenance: high
- Costs: almost always professional, €20,000 – €40,000+
- Suitable for: those who want the look of a swimming pool with biological water purification
| Type | Nature vs. technology | Plant zone | Cost (DIY) | Clarity | Maintenance |
|---|---|---|---|---|---|
| Type 1 | 100% nature | 50-60% | €1,500 – €3,000 | Moderate | Low |
| Type 2 | 70% nature | 30-40% | €2,500 – €5,000 | Reasonable | Moderate |
| Type 3 | 50/50 | 20-30% | €3,500 – €7,000 | Good | Moderate |
| Type 4 | 30% nature | 0% (biofilter) | €5,000 – €10,000 | Very good | High |
| Type 5 | 10% nature | 0% | €20,000+ | Crystal clear | High |
Permits: when are they required?
Whether you need a permit for a swimming pond depends on your local regulations. There are no universal rules that specifically cover swimming ponds. Most local authorities treat a swimming pond as a garden structure.
| Situation | Permit required? |
|---|---|
| Back garden, within zoning plan | Usually not, as long as you stay within the rules for permit-free construction |
| Area larger than 20 m2 | Often yes, check with your local authority |
| Deeper than 1.50 metres | Often yes |
| In a conservation area | Yes |
| Close to property boundary (less than 1 metre) | Check with your local authority |
| Groundwater extraction needed | Yes (water authority) |
Permit costs: €200 to €800 per application, depending on the municipality.
Tip: Call your local authority in advance. Ask about the rules for garden structures and mention the dimensions you are planning. This prevents fines (€500 to €10,000) or the obligation to remove the pond.
Materials list: Type 2 swimming pond (30 m2 total)
A Type 2 swimming pond of 30 m2 (20 m2 swimming zone + 10 m2 plant filter) with a depth of 1.50 metres in the swimming zone.
| Material | Quantity | Price (indicative) |
|---|---|---|
| EPDM pond liner (1 mm) | 60-70 m2 (incl. overlap) | €300 – €500 |
| Protective underlay (300 g/m2) | 60-70 m2 | €100 – €180 |
| Lava substrate (8-16 mm) | 3-5 m3 | €150 – €300 |
| Pond pump (5,000-10,000 l/hr) | 1 | €150 – €350 |
| Skimmer | 1 | €50 – €120 |
| Bottom drain | 1 | €40 – €80 |
| PVC piping (50-63 mm) | 20-30 metres | €60 – €120 |
| Aquatic plants (filter zone) | 30-50 plants | €100 – €200 |
| Partition wall material | as needed | €100 – €250 |
| Edge finishing (wood/stone) | as needed | €200 – €500 |
| Total materials | €1,250 – €2,600 | |
| Soil removal (skip) | 20-30 m3 | €300 – €600 |
| Optional: mini excavator hire | 1-2 days | €150 – €250/day |
| Total incl. earthworks | €1,700 – €3,700 |
Tools
- Spade and wheelbarrow
- Spirit level and tape measure
- String and pegs (for marking out)
- Stanley knife (for cutting liner)
- PVC glue and primer (for piping)
- Pond scissors
Step-by-step guide: building a swimming pond in 12 steps
Step 1: Choose the location
The ideal spot for a swimming pond:
– At least 5-6 hours of sunlight per day (aquatic plants need light)
– Not directly under large trees (falling leaves pollute the water)
– At least 1 metre from the property boundary
– Good access for soil removal during construction
– Level ground or a gentle slope
Step 2: Design the shape
Draw a design to scale. Determine:
– The size of the swimming zone (at least 3 x 5 metres for comfortable swimming)
– The size of the plant filter zone (at least 30-40% of the swimming zone for Type 2)
– The depth: 1.20 to 1.80 metres for the swimming zone, 30 to 60 cm for the filter zone
– The position of the entry point (steps or a gently sloping bank)
Step 3: Apply for a permit if necessary
Check with your local authority whether you need a permit. Do this before you start digging. A permit application takes 4 to 8 weeks.
Step 4: Mark out the shape
Mark the outline of the pond with pegs and string. Walk around it for a few days to check whether the shape and position are right. Adjust if needed before you start digging.
Step 5: Dig out the pond
This is the hardest part of the project. For a 30 m2 pond with 1.50 metre depth, you will be moving 20 to 30 m3 of soil. Consider hiring a mini excavator (€150 to €250 per day) if you do not want to do everything by hand.
Dig in layers:
– First the shallower plant filter zone (30-60 cm)
– Then the swimming zone (1.20-1.80 m)
– Make the walls sloped (45 degrees) for stability
– Leave plant shelves (plateaus) at 20-30 cm depth for marginal plants
Step 6: Build the partition wall
The partition wall between the swimming zone and filter zone is essential for Type 2. Use concrete blocks, stacked natural stone or a wooden retaining wall. The top of the wall should be 5 to 10 cm below the water surface, so that water flows over it from the swimming zone into the filter zone.
Step 7: Lay the protective underlay
Lay a layer of protective underlay (300 g/m2) over the entire bottom and walls. This protects the pond liner from sharp stones and roots. Let the underlay overlap the edge by at least 30 cm.
Step 8: Lay the EPDM pond liner
Lay the pond liner over the protective underlay. EPDM liner at 1 mm thickness is the standard for swimming ponds, with a lifespan of 30+ years. Work out the folds as well as possible. Let the liner overlap the edge by at least 50 cm for the bank finishing.
Tip: Lay the liner on a warm day. EPDM becomes more flexible in the heat and is easier to press into the corners.
Step 9: Install the technology
Place the bottom drain, skimmer and piping before filling the pond. The pump goes in a separate dry pump chamber or in the filter zone. Connect everything and test for leaks with a bucket of water.
Make sure the pump can circulate the entire pond volume in 4 to 6 hours. For a 30 m2 pond with an average water depth of 1 metre, that is approximately 30,000 litres, so a pump rated at 5,000 to 8,000 litres per hour is sufficient.
Step 10: Fill the filter zone with substrate
Wash the lava substrate (8-16 mm) thoroughly first, as it releases a lot of dust that will make the water cloudy. Fill the filter zone with a 20 to 30 cm layer of lava. This is the filter material where the beneficial bacteria grow that purify the water.
Step 11: Plant the filter zone
Plant the filter zone with purifying aquatic plants. Good choices include:
– Bulrush (strong purifier, grows quickly)
– Yellow flag iris (beautiful flowers, good filtration)
– Marsh strawberry (ground cover, purifying)
– Pondweed (submerged plant, oxygen-rich)
– Water mint (pleasant fragrance, purifying)
Plant 5 to 8 plants per square metre of filter zone. In the swimming zone, you can plant submerged plants such as pondweed and hornwort for extra oxygen.
Step 12: Fill the pond and let the ecosystem mature
Fill the pond with tap water. The water will be cloudy for the first 4 to 8 weeks. This is normal. The ecosystem needs to establish itself: bacteria colonise the lava substrate and plants begin filtering. Only swim once the water clears, usually after 6 to 8 weeks.
Maintenance calendar
| Period | Action |
|---|---|
| Spring (March-April) | Start the pump, remove dead plant material, replant aquatic plants |
| Summer (weekly) | Skim leaves and floating debris, remove string algae |
| Summer (monthly) | Empty skimmer, clean pump filter |
| Autumn (October) | Stretch a leaf net over the pond, cut back dying plants |
| Winter | Switch off the pump or run it at minimum, keep ice-free with a pond heater or polystyrene sheet |
Common mistakes
-
Plant filter zone too small. For Types 1 and 2, the plant zone is the engine of your water purification. A filter zone smaller than 30% of the swimming zone results in cloudy, greenish water. Stick to the minimum ratios per type.
-
Trees right next to the pond. Leaf fall into the pond is the biggest source of nutrients (phosphate, nitrate) that cause algae growth. Keep large trees at least 5 metres away, or stretch a leaf net over the pond in autumn.
-
Using PVC liner instead of EPDM. PVC is cheaper (€3-€5 per m2 vs. €5-€8 per m2 for EPDM), but only lasts 10 to 15 years and becomes brittle from UV radiation. EPDM lasts 30+ years and stays flexible. For a project of this size, the price difference of €100 to €200 is not worth the compromise.
-
Not installing a bottom drain. Without a bottom drain, debris collects on the floor of the swimming zone, where it rots and makes the water cloudy. A bottom drain removes this debris to the filter zone.
-
Swimming straight after filling. The ecosystem needs 6 to 8 weeks to establish itself. Swimming in a freshly filled pond disrupts this process and can cause skin irritation due to unbalanced water.
-
Feeding the pond with fertiliser or plant food. Aquatic plants in a swimming pond draw their nutrients from the water, that is exactly the purification process. Extra fertiliser overloads the system with nutrients and causes explosive algae growth.
Frequently asked questions
How big does a swimming pond need to be at minimum?
For comfortable swimming, you need at least 15 to 20 m2 of swimming area (for example 3 x 5 metres). Add the plant filter zone (30-60% of the swimming area for Types 1-2), and you arrive at a total of 25 to 35 m2. Smaller is possible, but then it is more of a plunge pool than a swimming pond.
Do swimming ponds attract mosquitoes?
Less than you might think. In a well-functioning swimming pond, dragonfly larvae, water beetles and other insects live that feed on mosquito larvae. Standing water in rain barrels and flower pots is a much bigger source of mosquitoes than a swimming pond with circulation.
Can I heat a swimming pond?
Technically yes, but it is not advisable for Types 1 and 2. Heated water promotes algae growth and disrupts the biological balance. For Types 4 and 5 (biopool), heating is possible since the purification is handled technically. Expect an additional €2,000 to €5,000 for a heat pump.
How deep does a swimming pond need to be?
At least 1.20 metres for comfortable swimming, ideally 1.50 to 1.80 metres. Deeper than 2 metres offers little benefit and makes construction considerably more expensive due to extra earthworks and liner. The filter zone is 30 to 60 cm deep.
What does annual maintenance cost?
For Types 1 and 2, it is €100 to €300 per year: electricity for the pump (€50-€150), replacing some plants (€30-€80) and possibly a new filter system every few years. Compare that with €1,500 to €3,000 for a conventional swimming pool.
Can I convert my existing pond into a swimming pond?
That is possible, provided the pond is deep enough (at least 1.20 metres) and you can create a separate filter zone. You will need to check the bottom and walls for suitability and probably replace the liner with 1 mm EPDM. Conversion costs range from €1,000 to €4,000, depending on the existing situation.
