A split air conditioner that isn’t cleaned regularly uses up to 25% more energy. At an average electricity rate of EUR 0.25 per kWh, that quickly adds up to EUR 50 to 100 in extra costs per year. On top of that, dirty filters blow dust, mould and bacteria into your living space, which can lead to headaches, allergic reactions and, in the worst case, legionella. A professional service costs between EUR 90 and 185, but you can easily handle the basic maintenance yourself for EUR 20 to 50 in materials. In this article, you’ll learn exactly how to clean your air conditioner step by step, what maintenance you can do yourself, and when it’s better to call a certified technician. With regular maintenance, your AC will last longer, run quieter, and save you significantly on your energy bill.
Why regular air conditioner maintenance is essential
An air conditioner draws dozens of cubic metres of air through its filters every hour. All that dust, pollen, household particles and moisture gets trapped in the system. After a few months without maintenance, the indoor unit is covered in a layer of dirt that drastically reduces performance.
The consequences of delayed maintenance are very real:
| Problem | Consequence | Cost if left untreated |
|---|---|---|
| Clogged filters | 15-25% higher energy consumption | EUR 50 – 100 extra per year |
| Mould growth in indoor unit | Musty smell, allergic reactions | Professional cleaning EUR 150 – 250 |
| Leaking condensation | Water damage to wall or ceiling | Repair costs EUR 200 – 500+ |
| Low refrigerant | AC no longer cools properly | Refill EUR 150 – 300 |
| Bacterial growth (legionella) | Health risks | Priceless |
Health authorities warn specifically about bacterial growth in poorly maintained air conditioning systems. Mould and bacteria, including staphylococci and legionella, thrive in the moist environment of an indoor unit.
How often should you clean your air conditioner?
The frequency of maintenance depends on how intensively you use the AC and the environment it operates in.
| Situation | Filter cleaning | Major service |
|---|---|---|
| Seasonal use (summer only) | Every month during use | Once a year (before summer) |
| Year-round use (cooling + heating) | Every 2-4 weeks | Twice a year |
| Pets in the home | Every 2 weeks | 1-2 times a year |
| Busy road or dusty environment | Every 2 weeks | Twice a year |
| Office space with little dust | Every 4-6 weeks | Once a year |
The rule of thumb: clean the filters every month that you use the air conditioner intensively. The outdoor unit only needs to be checked and cleaned about twice a year.
What do you need? Materials list with prices
Before you start, make sure you have all materials ready. No expensive tools are required.
| Material | Purpose | Estimated price |
|---|---|---|
| Vacuum cleaner with soft brush attachment | Vacuum dust from filters and fins | Already at home |
| Soft cloth or microfibre cloth | Wipe down housing and fins | EUR 3 – 5 |
| Soft brush (no stiff bristles) | Remove dirt from outdoor unit | EUR 5 – 10 |
| AC cleaning spray (foam) | Deep clean evaporator/indoor unit | EUR 8 – 15 |
| Garden hose with spray nozzle | Rinse outdoor unit | Already at home |
| Bucket of lukewarm water | Soak and rinse filters | Already at home |
| Spirit level (optional) | Check if indoor unit is level | EUR 5 – 10 |
| Total | EUR 20 – 50 |
Never use bleach, ammonia or other harsh cleaning agents. These damage plastic and metal and can release toxic fumes when the AC is running.
Step by step: cleaning the filters of your split AC
Cleaning the filters is the most important maintenance you can do yourself. It takes about 30 minutes and requires no technical knowledge.
Step 1: Switch off the air conditioner
Turn off the AC using the remote control and unplug it from the wall socket. Wait at least 10 minutes for the system to come to a complete stop.
Step 2: Open the front panel
Open the front panel of the indoor unit. On most brands (Daikin, Mitsubishi, Samsung, LG), there are two clip points on the sides. Carefully pull the panel upward until it clicks into place.
Step 3: Remove the filters
Carefully slide the filters out of the indoor unit. They usually sit in grooves and come out with a gentle push upward and then forward. Note: do this over a towel or newspaper, as dust will fall off.
Step 4: Remove dry dust
Gently tap the filters over a bin or do this outside. Then use the vacuum cleaner with a soft brush attachment. Start at the top of the filter (the side where air enters) so you vacuum dust off rather than pushing it in.
Step 5: Wash the filters
Rinse the filters under running lukewarm water (maximum 50 degrees Celsius). For stubborn dirt, soak them for 15 minutes in a bowl of lukewarm water with a drop of dish soap. Then rinse thoroughly with clean water.
Step 6: Let them dry completely
Allow the filters to dry completely before reinstalling them. This takes at least 2 to 3 hours, but overnight is better. Never put them back while damp, as this promotes mould growth.
Step 7: Reinstall the filters
Slide the dry filters back into their grooves, close the front panel and plug the unit back in. Switch on the air conditioner and check that everything is working normally.
Deep cleaning the indoor unit
Besides the filters, the rest of the indoor unit also deserves regular attention. Do this 2 to 4 times a year, depending on usage.
Fins and air grilles
Wipe the fins (the movable strips at the bottom) with a damp microfibre cloth. Use a soft brush for the grilles at the top. Avoid dripping water into the unit.
The evaporator (cooling block)
The evaporator is the finned block behind the filters. This is where moisture condenses and mould grows fastest. Use a dedicated AC cleaning foam (available at DIY stores for EUR 8 to 15). Spray the foam onto the evaporator, leave it for 15 to 20 minutes, and let it drain away naturally through the condensate outlet.
Check the condensate drain
The condensate drain is the tube that carries water from the indoor unit to the outside. If it gets blocked, the indoor unit starts leaking. Check that water flows freely. If it’s blocked, you can carefully flush the tube with a little water.
| Component | How to clean | Frequency |
|---|---|---|
| Filters | Vacuum + wash with lukewarm water | Monthly during use |
| Fins and grilles | Damp microfibre cloth | Every 2-3 months |
| Evaporator (cooling block) | AC cleaning foam | Twice a year |
| Condensate drain | Check for blockages, flush | Twice a year |
| Outer housing | Damp cloth | Every 2-3 months |
Maintaining the outdoor unit
The outdoor unit is often forgotten but equally important. Leaves, dust, cobwebs and even insect nests can block the fan and heat exchanger.
Step 1: Clear the surroundings
Make sure there is at least 50 centimetres of clearance around the outdoor unit. Remove leaves, branches and weeds.
Step 2: Clean the housing
Wipe the outside with a damp cloth. Remove cobwebs and accumulated dirt.
Step 3: Rinse the fins
Carefully rinse the fins (the thin metal slats) with a garden hose on low pressure. Spray from the inside outward, so you flush dirt out rather than pushing it in. Never use a pressure washer, as it will bend the fins.
Step 4: Check the fan
Make sure the fan can spin freely and that no dirt or leaves are stuck between the blades.
Step 5: Check the drainage
Make sure water can drain freely underneath the outdoor unit. A blocked drain can lead to corrosion.
Costs: DIY vs. hiring a professional
The choice between doing it yourself and hiring a professional depends on the type of maintenance.
| Type of maintenance | DIY | Professional |
|---|---|---|
| Cleaning filters | EUR 0 (materials already at home) | Part of service (EUR 90 – 185) |
| Cleaning indoor unit (basic) | EUR 10 – 20 (cleaning spray) | Part of service |
| Cleaning outdoor unit | EUR 0 (garden hose) | Part of service |
| Checking/refilling refrigerant | Do not attempt yourself | EUR 150 – 300 |
| Leak test | Do not attempt yourself | EUR 75 – 150 |
| Electrical inspection | Do not attempt yourself | Part of service |
| Single split – complete service | EUR 20 – 50 (basic) | EUR 90 – 185 |
| Multi split – complete service | EUR 20 – 50 (basic) | EUR 145 – 250 |
Additional costs for a hard-to-reach outdoor unit: EUR 30 to 75 on top of the service fee.
When should you call a professional?
Basic maintenance like cleaning filters and dusting the units is something you can handle yourself. But there are situations that require a certified technician.
Call a professional immediately if:
-
The AC no longer cools or heats properly – This often indicates low refrigerant. By law, only certified refrigerant technicians are allowed to refill it.
-
Unusual noises – Rattling, squeaking or humming sounds point to a mechanical issue with the fan, compressor or loose components.
-
Water leaking from the indoor unit – If the condensate drain is blocked and flushing doesn’t help, there may be a deeper issue.
-
A musty or foul smell that won’t go away – Still smelling something after cleaning filters and evaporator? Then the mould is deep in the system and professional disinfection is needed.
-
Ice forming on the pipes – This indicates a refrigerant leak or a faulty expansion valve.
-
The AC keeps shutting down with error codes – Error codes on the display require diagnosis with professional equipment.
F-gas regulations
By law, only a certified company may work with the refrigerant in your air conditioner. For systems containing more than 3 kilograms of refrigerant, an annual mandatory leak test by a certified technician is required. This is laid down in the European F-gas Regulation.
Seasonal maintenance schedule
| Period | Action | DIY or professional |
|---|---|---|
| March/April (before summer) | Complete cleaning of indoor unit + filters + outdoor unit | DIY |
| March/April | Professional service (refrigerant, leak test, electrics) | Professional |
| May – September | Monthly filter cleaning | DIY |
| July/August | Check outdoor unit for dirt and blockages | DIY |
| October (after summer) | Clean filters, clean indoor unit, cover outdoor unit (optional) | DIY |
| November (before heating season) | Professional service if you also heat with the AC | Professional |
Tip: Schedule your professional service in early spring (March/April). In summer, technicians are much busier and prices may be higher.
Common mistakes
-
Putting filters back while still damp – This is the number one mistake. Damp filters are a breeding ground for mould and bacteria. Always let filters dry at least overnight before reinstalling them.
-
Using a pressure washer on the outdoor unit – The fins of the outdoor unit are paper-thin. A pressure washer bends them, blocking airflow and causing performance to plummet. Always use a regular garden hose on low pressure.
-
Using harsh cleaning agents – Bleach, ammonia and degreasers attack plastic and metal. Only use lukewarm water, mild dish soap or a dedicated AC cleaning product.
-
Only cleaning the filters and skipping the rest – Filters are important, but the evaporator, fins and condensate drain also need maintenance. A clean filter on a dirty evaporator doesn’t solve the problem.
-
Skipping maintenance because the AC “still works fine” – An AC that works can still be dirty and using more energy. The energy loss only becomes apparent on your annual bill. Meanwhile, mould and bacteria build up gradually.
-
Attempting to handle refrigerant yourself – Refrigerant (R32, R410A) is harmful to the environment and dangerous when handled improperly. Refilling is legally reserved for certified technicians. Never attempt this yourself.
Frequently asked questions
How often should I clean the filters of my split air conditioner?
Clean the filters every month during the period you actively use the AC. With pets or a dusty environment, every two weeks is advisable. The outdoor unit only needs checking twice a year.
Can I do all the maintenance on my air conditioner myself?
The basic maintenance, yes: cleaning filters, wiping down the indoor unit, rinsing the outdoor unit and checking the condensate drain. But for checking and refilling refrigerant, leak tests and electrical inspections, you need a certified technician. That’s also a legal requirement.
How much does a professional service cost for a split air conditioner?
For a single split unit, you’ll pay an average of EUR 90 to 185 per service. For a multi-split system (multiple indoor units), costs range from EUR 145 to 250. Refilling refrigerant costs EUR 150 to 300 extra if needed.
What cleaning products can I use for my air conditioner?
Use lukewarm water (maximum 50 degrees Celsius), optionally with a drop of mild dish soap for the filters. For the evaporator, use a dedicated AC cleaning foam (EUR 8 to 15 at the DIY store). Never use bleach, ammonia or other harsh cleaning agents.
How much energy do I save with regular maintenance?
Clogged filters can increase energy consumption by 15 to 25%. With average annual AC usage, regular maintenance easily saves EUR 50 to 100 per year on electricity. Good maintenance also extends the lifespan of your air conditioner by years.
When should I replace my air conditioner instead of maintaining it?
If your AC is older than 10 to 15 years, has frequent breakdowns, contains the refrigerant R22 (banned since 2015), or if repair costs exceed half the price of a new system, replacement makes more sense than repair.
👉 View all DIY plans
