You flush the toilet. Six litres of clean drinking water disappear down the drain. You do that roughly six times a day. That’s 36 litres of water — filtered, purified, quality-controlled — straight into the sewer. Every single day.
Meanwhile, water authorities across Europe are warning that drinking water shortages could become a reality by 2030. Water prices are rising by an average of 3–4% in 2026. And everyone looks to the government for answers. But you could also look at your own roof. Or your shower.
Greywater recycling and rainwater harvesting are no longer fringe ideas. They’re practical systems you can install yourself, that save money, and that reduce pressure on the mains water supply. This article explains how to do it, what it costs, and what regulations you need to be aware of.
What exactly is greywater?
Greywater is lightly contaminated household water. It comes from:
- Shower and bath — soap, shampoo, skin cells
- Washbasin — hand soap, toothpaste
- Washing machine — detergent, fibres, dirt
Greywater is NOT:
- Blackwater — toilet water (contains faecal matter)
- Kitchen water — washing-up water with grease, food waste and bacteria
- Dishwasher water — too greasy and too hot
The distinction matters. Greywater is relatively clean and can be reused after simple filtering for purposes that don’t require drinking water quality.
What can you use greywater and rainwater for?
| Application | Suitable water | Savings per year |
|---|---|---|
| Flushing toilets | Greywater or rainwater | 10,000 – 15,000 litres |
| Watering the garden | Rainwater or greywater (filtered) | 5,000 – 20,000 litres |
| Washing machine | Rainwater (filtered, soft water) | 5,000 – 8,000 litres |
| Washing the car | Rainwater | 500 – 1,500 litres |
| Cleaning (floors) | Rainwater | 1,000 – 2,000 litres |
Total savings: an average household can replace 30 to 50% of its mains water consumption with grey or rainwater. That’s 20,000 to 50,000 litres per year.
At an average water price of €2.10 per m³ (around £1.80) in 2026, you save €40 to €100 (£35–£85) per year on drinking water. Not spectacular, but the system pays for itself over time and you’re contributing to water conservation.
Option 1: DIY rainwater harvesting
Rainwater harvesting is the simplest way to reuse water. You collect rainwater from your roof, store it, and use it for the toilet, garden or washing machine.
What do you need?
| Component | Function | Cost |
|---|---|---|
| Rain barrel (200–500 litres) | Above-ground storage, simplest option | €30 – €150 (£25–£130) |
| Underground tank (1,500 – 5,000 litres) | Larger storage, frost-proof | €500 – €2,500 (£430–£2,150) |
| Gutter filter / leaf separator | Prevents contamination of the water | €20 – €80 |
| Fine filter (100 micron) | Filters fine debris for household use | €30 – €100 |
| Submersible pump or automatic water supply unit | Pumps water from the tank to the pipework | €80 – €300 |
| Pipework (PE pipe) | Separate pipe system | €50 – €200 |
| Overflow provision | Drainage when the tank is full | €20 – €50 |
| Top-up unit (optional) | Automatically tops up with mains water when the tank is empty | €150 – €400 |
Basic installation: rain barrel for the garden
The simplest setup: a rain barrel under your downpipe. Costs less than €100 (£85) and is installed in an hour.
- Choose a rain barrel of at least 200 litres
- Cut the downpipe at the desired height
- Fit a rain barrel filler (automatic diverter when the barrel is full)
- Place the barrel on a raised platform (for water pressure with a garden hose)
- Connect a tap at the bottom of the barrel
This is sufficient for garden watering. No pump needed, no pipework.
Advanced installation: rainwater for toilet and washing machine
If you want to use rainwater for flushing toilets and the washing machine as well, you need a more serious system.
Step 1: Choose and install the tank
An underground tank of 3,000 to 5,000 litres is ideal for an average household. The tank is buried in the garden, frost-proof at a minimum depth of 80 cm.
- Plastic tanks (PE/PP): lightweight, easy to install, €500 – €1,500
- Concrete tanks: heavier, longer lifespan, €800 – €2,500
- Cast in situ: possible but labour-intensive
Step 2: Filtering
- Leaf separator in the downpipe (coarse filter)
- Fine filter 100 micron before the pump
- Optionally a sediment filter in the tank (calmed inlet that draws water from the bottom)
Step 3: Pump and pipework
- Automatic water supply unit with dry-run protection: pumps water from the tank to the draw-off points
- Separate pipe system: PE pipe (marked blue or green) to toilet and washing machine
- Critical: rainwater must NEVER come into contact with the mains water supply (EN 1717, see below)
Step 4: Top-up unit
When the tank runs dry (during a dry summer), the system must automatically top up with mains water. A top-up unit does this via a free fall (air gap), ensuring no backflow into the mains water supply.
Total cost overview — rainwater harvesting
| Type of installation | Material cost | DIY? | Professional installation cost |
|---|---|---|---|
| Rain barrel + garden | €50 – €150 (£45–£130) | Yes, straightforward | n/a |
| Underground tank + toilet | €1,000 – €2,500 (£860–£2,150) | Yes, with experience | €3,000 – €5,000 (£2,600–£4,300) |
| Complete system (toilet + washing machine + garden) | €1,500 – €3,500 (£1,300–£3,000) | Yes, with plumbing experience | €4,000 – €7,000 (£3,450–£6,000) |
Option 2: Installing a greywater system
A greywater system captures wastewater from the shower, bath and/or washbasin, filters it, and reuses it for flushing toilets.
How does it work?
- Collection: the drain from the shower/bath is diverted to a collection tank (usually in the crawl space, cellar or utility room)
- Filtering: the water passes through a filter (mechanical, biological or both)
- Storage: treated water is stored in a buffer tank
- Distribution: a pump delivers the water to the toilet cisterns
Types of greywater systems
| Type | How it works | Price | Water quality |
|---|---|---|---|
| Simple filter (mechanical) | Sieves coarse debris, no disinfection | €300 – €800 (£260–£690) | Basic — suitable for toilet flushing |
| Biological filter system | Bacteria break down organic matter | €800 – €2,000 (£690–£1,720) | Good — suitable for toilet + garden |
| Membrane filtration (MBR) | Ultra-fine filtering + UV disinfection | €2,000 – €5,000 (£1,720–£4,300) | High — suitable for washing machine |
DIY installation: what’s involved?
You can install a simple greywater system yourself if you have plumbing experience.
What you need:
- Collection tank (100 – 300 litres, plastic)
- Filter unit (mechanical or biological)
- Submersible pump with float switch
- PE pipe (separate from drinking water, marked)
- Non-return valve
- Overflow connection to the sewer
Installation in 8 steps:
- Choose the location for the collection tank (crawl space, cellar or utility room)
- Divert the drain from the shower/bath to the collection tank (T-piece in the existing drain pipe)
- Install a coarse filter (hair filter) before the tank
- Place the collection tank with overflow connection to the sewer
- Install the filter unit after the tank
- Fit the pump with float switch
- Run a separate pipe to the toilet cisterns (mark the pipe as “not drinking water”)
- Install a top-up tap with air gap as backup
Maintenance: clean the filter monthly, flush the tank annually, check the pump is working.
Greywater system costs
| Component | Cost |
|---|---|
| Collection tank 200 litres | €80 – €200 (£70–£170) |
| Filter unit (mechanical) | €100 – €400 (£85–£345) |
| Pump with float switch | €80 – €200 (£70–£170) |
| Pipework + fittings | €50 – €150 (£45–£130) |
| Non-return valve + stop valves | €30 – €60 (£25–£50) |
| Total materials | €340 – €1,010 (£290–£870) |
| Installation by plumber | €500 – €1,000 (£430–£860) extra |
Legal requirements: EN 1717 and drinking water safety
This is the most important section of this article. Recycled water (grey or rain) must never come into contact with the mains drinking water supply. The standard that governs this is EN 1717 (Protection against contamination of potable water in water installations).
The key rules
-
Separate pipe systems: recycled water must run through a completely separate pipe circuit. No T-pieces, no cross-connections, no shared pipes.
-
Air gap (type AA or AB): where recycled water and mains water meet (top-up unit), an air gap is mandatory. This is a physical air break of at least 20 mm between the mains water outlet and the maximum water level in the tank.
-
Marking: all pipes carrying recycled water must be clearly marked. Use blue or green PE pipe, or apply “NOT DRINKING WATER” labels to existing pipes.
-
Taps: draw-off points with recycled water must display a warning sign. Some local authorities require a special tap design that is incompatible with standard garden hose fittings.
-
Notification requirement: in some areas you must notify your water company when installing a greywater or rainwater system. Check with your local authority or water provider.
What if you get it wrong?
If recycled water flows back into the mains supply, you could contaminate your neighbours’ drinking water. This is a serious health risk. Water companies carry out strict inspections and can require removal of any installation that does not comply with EN 1717.
Grants and incentives
Local authority grants
Across Europe, more and more municipalities offer grants for rainwater harvesting and disconnecting surface water from the sewer. Availability and amounts vary widely by location:
- In the Netherlands, many municipalities offer €200–€500 for disconnecting rainwater, and some provide free rain barrels
- In the UK, water companies such as Thames Water and Southern Water occasionally offer rebates on water butts and rainwater harvesting equipment
- In Germany, some Länder offer grants for rainwater systems (Regenwassernutzung) as part of climate adaptation programmes
- In Belgium, Flanders offers premiums for rainwater tanks on new builds
Always check your local authority’s website — look for terms like “climate adaptation”, “water management” or “sustainable drainage”.
Sewer charges
In some areas you pay reduced sewer charges if you disconnect rainwater from the public sewer, since you’re discharging less water. The saving varies from €30 to €100 (£25–£85) per year depending on your municipality.
Rainwater vs. greywater: which is right for you?
| Criterion | Rainwater harvesting | Greywater system |
|---|---|---|
| Installation complexity | Medium | High |
| Entry cost | Low (rain barrel €50) to medium | Medium to high |
| Water quality | Good (little contamination) | Moderate (soap, skin cells) |
| Availability | Depends on rainfall | Constant (every shower) |
| Maintenance | Minimal | Monthly filter cleaning |
| Best for | Garden, toilet, washing machine | Toilet |
| Suitable for flats | Difficult (no private roof) | Possible (small systems) |
Recommendation for beginners: start with a rain barrel for the garden. Costs next to nothing, takes an hour to set up, and introduces you to water reuse. Happy with it? Then you can scale up to an underground tank or add a greywater system.
Frequently asked questions
Does greywater smell?
After 24–48 hours, untreated greywater can start to smell due to bacterial growth. That’s why it’s important to process it quickly or choose a system with biological filtering. Modern systems keep the water fresh.
Can I drink rainwater?
Technically yes, after extensive filtering and UV disinfection. But in most of Europe this isn’t necessary and isn’t recommended. Tap water is excellent quality and cheaper than the purification costs for rainwater.
What if it doesn’t rain for a long time?
A good system has a top-up unit that automatically switches to mains water when the tank is empty. You won’t notice a thing — the toilet keeps flushing as normal.
Can I use greywater in the garden?
Yes, provided it’s properly filtered and you don’t spray it on edible crops that are eaten raw. Use it for lawns, shrubs and ornamental planting.
How big should my rainwater tank be?
Rule of thumb: 1,000 litres per 25 m² of roof area. For an average terraced house (50 m² of roof), a tank of 2,000 – 3,000 litres is a good choice.
Sources
- InstallateursZaken — Rainwater innovations 2026
- NEN-EN 1717: Protection against contamination of potable water in water installations
- Vewin — Drinking water tariff 2026
Explore our building plans at FredsDIYPlans.com for more DIY projects.
