A single ceiling lamp in the middle of the room. For years, that was the standard in living rooms. The result: flat light, harsh shadows and a space that looks exactly the same at every time of day.
In 2026, that is a thing of the past. The trend of layered lighting has reached the living room. The principle is simple: you combine light sources at different heights and with different functions. Recessed spotlights in the ceiling, a pendant lamp above the dining table, LED strips behind furniture, a floor lamp next to the sofa. All on warm light (2700 Kelvin) and preferably dimmable.
The best part: you can largely install this yourself. No contractor needed. No major renovation. Just a good plan, the right materials and a basic understanding of electrics.
In this article, you will learn how to create a lighting plan, what the different light layers are, how to install LED strips and recessed spotlights yourself, and how to connect everything to dimmers. Step by step, with specific product specifications and practical tips.
What is layered lighting?
Layered lighting means combining multiple types of light at different heights within a room. Instead of one light source doing everything, you give each light layer its own function. This creates depth, atmosphere and flexibility.
The concept originally comes from the professional interior design world, but has become increasingly accessible in recent years. LED technology is cheaper, dimmers are easier to install, and LED strips are so simple you can stick them behind a shelf.
There are three basic layers:
- General lighting (ambient). This is the base light in the room. Think of recessed spotlights or a ceiling lamp. It illuminates the entire room evenly.
- Task lighting (task). Directed light at places where you do things: reading, cooking, working. A desk lamp, spotlights above the worktop, or a reading lamp beside the sofa.
- Mood lighting (accent). Light that adds atmosphere without a functional purpose. LED strips behind a TV unit, a light cove along the ceiling, or uplighters illuminating a wall.
The power lies in the combination. During the day, you mainly use the general lighting. In the evening, you dim it and let the mood lighting do the work. When reading, you switch on the task lighting. This way, the lighting adapts to the moment without you having to move any lamps.
Creating a lighting plan in 4 steps
Before you start drilling and wiring, you need a plan. A lighting plan prevents you from discovering after the fact that you have too few light points, that the dimmer is not compatible, or that your LED strip is in the wrong place.
Step 1: Draw the floor plan
Take the floor plan of your room or measure it up. Draw in the fixed elements: windows, doors, furniture. Mark the places where you sit, work, eat and walk. These are the zones that each need their own light.
Step 2: Determine which light layer you need per zone
Run through the three layers for each zone:
| Zone | General | Task | Mood |
|---|---|---|---|
| Seating area | Recessed spotlights (dimmable) | Reading lamp | LED strip behind TV unit |
| Dining table | — | Pendant lamp (dimmable) | Candles or indirect lighting |
| Work area | Recessed spotlights | Desk lamp | — |
| Walkway | Recessed spotlights | — | LED strip under floating sideboard |
Step 3: Choose the colour temperature
For living spaces, 2700 Kelvin is the standard. This gives warm, yellowish light comparable to traditional incandescent bulbs. Do not go higher than 3000K in the living room unless you deliberately want a cooler feel.
Important: choose the same colour temperature for all light sources in the same room. Nothing looks messier than a warm pendant lamp next to cool white spotlights.
Step 4: Count the circuits and plan the wiring
Each light layer that you want to be able to switch or dim independently needs its own circuit. In practice, for a living room you typically need three circuits:
- Recessed spotlights (on dimmer)
- Dining table pendant lamp (on dimmer)
- LED strips and indirect lighting (on dimmer or switch)
Note for each circuit how many light points it will have and the total wattage. You will need this when choosing the right dimmer.
Choosing the right materials
With your lighting plan in hand, you can order materials. These are the key choices.
Recessed spotlights
Choose recessed spotlights with a GU10 fitting. This allows you to easily replace the light source later. Pay attention to the recessed depth: most spotlights need 70-90 mm. Measure beforehand whether your ceiling offers sufficient space (with a suspended ceiling or timber joist floor).
Specifications to look for:
– Light output: minimum 300 lumens per spotlight for a living room
– Colour temperature: 2700K
– Dimmable: yes (check the packaging)
– Beam angle: 36 degrees for focused spotlights, 60 degrees for broader spread
LED strips
For indirect lighting, LED strips are the most versatile option. They are self-adhesive, run on 12V or 24V via an adapter, and you can cut them to size.
What to look for:
– Choose 24V instead of 12V for longer strips (less voltage drop)
– Minimum 60 LEDs per metre for an even light output
– CRI (Colour Rendering Index) of 90 or higher: this prevents colours looking washed out
– Warm white (2700K) or adjustable colour temperature (tuneable white)
– Waterproof rating (IP65) is only necessary in the bathroom or kitchen
Dimmers
Not every dimmer works with every LED. This is the most common mistake with layered lighting. Traditional dimmers (for incandescent bulbs) cause flickering, buzzing or simply do not work with LED lighting.
Choose an LED dimmer suitable for the load of your lamps. Check:
– Minimum and maximum load of the dimmer (often 0-150W or 0-300W)
– Whether the dimmer is trailing edge: this type works best with LED
– Compatibility lists from the dimmer manufacturer
A rotary dimmer with push function (on/off + dimming) is the most practical option for most situations.

Installing recessed spotlights: step by step
Recessed spotlights are the backbone of your general lighting. Here is how to install them yourself.
What you need:
– Hole saw (diameter according to spotlight size, usually 68 mm)
– Drill
– Cable detector
– Twin-core cable 2×1.5 mm2 (or 3×1.5 mm2 if you need a separate switch wire)
– Connector blocks or Wago connectors
– Pencil and tape measure
Step 1: Determine the positions
Distribute the spotlights evenly across the ceiling. Keep at least 60 cm from the wall and 80-120 cm between spotlights. Mark the positions with a pencil.
Use a cable detector to check there are no pipes, joists or cables at those positions.
Step 2: Cut the holes
Cut with the hole saw at the marked positions. In a plasterboard ceiling, this is straightforward. In concrete, you need a special hole saw with carbide teeth.
Tip: drill a small pilot hole (6 mm) first to centre the hole saw.
Step 3: Run the wiring
Run cable from the switch (or dimmer) to the first spotlight position, and from spotlight to spotlight. Use a draw wire if the distances are large. Connect the spotlights in a parallel circuit: each spotlight gets its own branch from the supply cable.
Important: always work with the power off. Switch off the relevant circuit at the consumer unit and verify with a voltage tester.
Step 4: Connect the spotlights
Join the wires with Wago connectors (blue to blue, brown to brown, yellow/green to earth if applicable). Push the spotlight with its spring clips into the hole. The springs clamp the spotlight firmly into the ceiling.
Step 5: Fit the lamps and test
Screw the GU10 lamps into the fittings. Switch the circuit on and test whether all spotlights light up and dim correctly.
Installing LED strips for indirect lighting
LED strips give your living room the mood layer that makes all the difference. The most common applications:
- Behind a TV unit or sideboard (if the furniture stands away from the wall or floats)
- In a niche or along a suspended ceiling
- Under kitchen wall units (task lighting)
- Behind a mirror in the bathroom
Step 1: Measure the length
Measure the spot where the strip is to go. Order slightly more than you need: you can shorten LED strips at the marked cut lines (usually every 5 or 10 cm), but extending them is trickier.
Step 2: Mount an aluminium profile
Do not stick LED strips directly onto wood or MDF. Use an aluminium profile with an opal (frosted) diffuser cover. The profile serves two functions: it conducts heat away (extending the lifespan of the LEDs) and the opal strip diffuses the light so you do not see individual LED dots.
Screw the profile in place or fix it with double-sided mounting tape (3M VHB or equivalent).
Step 3: Stick the LED strip into the profile
Remove the protective film from the self-adhesive backing and press the strip into the aluminium profile. Ensure the strip sits straight and without kinks.
Step 4: Connect the power supply
LED strips run on low voltage (12V or 24V). You need a driver (adapter) that converts mains voltage (230V) to the correct voltage. Choose a driver with sufficient capacity: add up the wattage of your LED strip and select a driver that can deliver at least 20% more.
Example: a 3-metre strip at 14.4W per metre = 43.2W. Choose a driver of at least 52W (60W is a standard size).
Want to dim the LED strip? Then choose a dimmable driver, or place a PWM dimmer between the driver and the strip.
Step 5: Hide the driver
The driver is a box roughly the size of the palm of your hand. Hide it behind the furniture, in a cupboard, or above the suspended ceiling. Ensure adequate ventilation: drivers get warm and need air circulation.
Connecting and adjusting dimmers
Dimmers are essential for layered lighting. Without dimmers, you cannot control the light layers independently, and you lose the entire effect.
Connecting a dimmer (replacing an existing switch):
- Switch off the circuit at the consumer unit.
- Remove the face plate and the existing switch.
- Note which wire is the live (brown or black) and which is the switch return.
- Connect the dimmer according to the manufacturer’s diagram. For a standard LED dimmer: live-in to the L terminal, switch return to the arrow terminal.
- Push the dimmer into the back box and fit the face plate.
- Switch the circuit on and test.
Adjusting the dim range:
Many LED dimmers have an adjustment screw or digital setting that lets you adjust the minimum dim level. This prevents the lamps from flickering at the lowest setting. Turn the minimum level up until the flickering stops.
Smart dimmers
Want to control the lighting with your phone or by voice? Then choose a smart dimmer (Zigbee, Z-Wave or WiFi). These replace your existing switch and can be linked to systems such as Philips Hue, Home Assistant or Google Home. Note: you often need a hub (except with WiFi dimmers).
The advantage of smart dimmers is that you can set scenes. One press of a button and all three light layers switch to the right level for film night, dinner or reading.
Common mistakes with layered lighting
Even with a good plan, you can make mistakes that are difficult to fix afterwards. These are the five most common.
1. Mixing the wrong colour temperatures
A pendant lamp at 3000K next to LED strips at 2700K seems like a small difference, but your eye spots it immediately. The result looks messy and unsettled. Choose one colour temperature and stick to it throughout the room.
2. Non-dimmable lamps on a dimmer
It is not always clearly stated on the packaging. Non-dimmable LED lamps on a dimmer cause flickering, buzzing or premature failure. Check before purchasing whether the lamp is dimmable.
3. Too much light, too little atmosphere
The tendency is to install too many spotlights. This creates an office-like effect. For a living room of 30 m2, 6-8 recessed spotlights are enough alongside your task and mood lighting. Less is more.
4. No separate circuit per light layer
If all your lamps are on the same switch, you cannot differentiate. Each light layer must be independently switchable. That means separate circuits or switches per layer.
5. Mounting LED strips without a profile
Without an aluminium profile, you see individual light dots instead of an even line of light. And the strip runs hotter than necessary, which shortens its lifespan. A profile costs a few euros per metre and makes a world of difference.
Frequently asked questions
How many light points do I need in a living room?
For a living room of 25-35 m2, a good baseline is: 6-8 recessed spotlights for general lighting, 1-2 pendant lamps above the dining table, 1-2 floor or table lamps near the seating area, and 1-2 LED strips for mood lighting. The exact number depends on your space and preferences.
Can I install layered lighting without new wiring?
Partially. LED strips work from a plug socket and can be added without new wiring. Floor lamps and table lamps likewise. But for recessed spotlights and a dimmable pendant lamp, you generally do need new wiring, especially if you want separate dim circuits.
What does a lighting plan for a living room cost?
If you do it yourself, the material costs are manageable. Expect 15-30 euros per recessed spotlight (including lamp), 20-50 euros per metre of LED strip with profile and driver, and 25-60 euros per dimmer. For a complete living room, you are looking at 300-600 euros in materials, excluding pendant lamps and floor lamps.
Is 2700K always the best colour temperature?
For living rooms and bedrooms, yes. It gives warm, relaxing light. In a kitchen or bathroom, you might consider 3000K: slightly brighter, but still warm. Above 4000K, the light becomes cool and clinical — not suitable for living spaces.
Am I allowed to connect a dimmer myself?
Replacing a dimmer where a switch already exists is something you can do yourself as a homeowner. You are then working on an existing circuit. However, installing new circuits at the consumer unit or making changes to the distribution board must be done by a qualified electrician (in the Netherlands, this must comply with the NEN 1010 standard; similar regulations apply in other countries).
What is the difference between a PWM dimmer and a trailing edge dimmer?
A trailing edge dimmer sits in the wall and operates on 230V. You use it for dimmable GU10 spotlights and pendant lamps. A PWM dimmer operates on low voltage (12V/24V) and sits between the driver and the LED strip. You use it specifically for LED strips.
Conclusion
Layered lighting is no longer a luxury. It has become the standard for a living room that looks and feels right at every time of day. And the best part: you can largely install it yourself.
The foundation is a good lighting plan. Three layers — general, task and mood — distributed across your space, each on its own dim circuit. Choose 2700K consistently, invest in an LED dimmer that matches your lamps, and always mount LED strips in an aluminium profile.
Start with the room where you spend the most time. Experience the difference that dimmable, layered lighting makes compared to that single ceiling lamp. Then expand to the rest of your home.
Check out our DIY plans at fredsdiyplans.com for more home improvement projects.
