A threshold of three centimetres. It sounds like nothing. But for someone in a wheelchair, using a walking frame or dealing with stiff knees, it is a daily barrier. And it is not just for older people. Young families with a pushchair, people with a temporary injury, or anyone who simply wants to live comfortably — all benefit from a step-free home.

In new-build properties, a maximum threshold height of 2 centimetres is already mandatory under building regulations. But in existing homes, thresholds crop up everywhere: at the bathroom, between rooms, at the back and front doors. And they do not come out easily.

In this article you will learn what step-free building actually involves, what the rules are, and how to remove or lower thresholds yourself. From shower thresholds to exterior doors, from threshold ramps to zero thresholds. Step by step, practical and doable.

What is step-free building?

Step-free building means there are no significant height differences at floor level. No thresholds between rooms, no step at the shower, no ridge at the exterior door. The goal is that you can walk or wheel through every part of your home on one level.

Building regulations typically stipulate that thresholds in new-build homes should be no more than 2 centimetres high. The same requirement applies at entrance doors (the front door and the door to outdoor spaces). This is called a zero threshold or low threshold.

In practice, more and more builders aim for a true zero threshold: 0 centimetres of height difference. That is technically more challenging, but the result is a home that is fully accessible without any further adaptation.

For existing homes, these requirements do not automatically apply. But if you are renovating or remodelling, it is wise to deal with thresholds at the same time. Then you will not have to do it later.

Why step-free building makes sense

Step-free building is not just for people with a disability. It is an investment in the future of your home.

Living independently for longer. An ageing population affects everyone. There is a good chance that you or your partner will become less mobile one day. A step-free home makes it possible to stay at home for longer without major alterations.

Higher property value. Accessible homes are increasingly sought after. Buyers look for future-proofing. A step-free home scores well on that front.

Day-to-day comfort. No fussing with the vacuum cleaner over thresholds, no pushchair getting caught, no coffee spilt as you step over a ridge carrying a tray. These are small frustrations you only notice once they are gone.

Future-proofed for care needs. If you ever need to apply for home adaptations through local authority support, you are already a step ahead. Fewer modifications are needed, which speeds up the process.

Where are the thresholds in an existing home?

Before you start, it is wise to walk through your entire home and map out every threshold. The most common locations:

Interior door frames. The classic wooden threshold between two rooms. Usually 1 to 3 centimetres high. Sometimes higher if there is a difference in floor level.

Bathroom and shower. The shower threshold is often the highest in the house: 3 to 10 centimetres. This is intentional to hold back water, but there are better solutions.

Exterior doors. The threshold at the front and back door is often 3 to 5 centimetres high. Water resistance plays a major role here. Rainwater must not flow inside.

Sliding doors and patio doors. Many sliding doors have a bottom rail that protrudes 2 to 5 centimetres above the floor. This is one of the trickiest thresholds to remove.

Transition to the garage or utility room. There is often a height difference of 5 to 15 centimetres here due to a difference in floor level.

Walk through your home with a measuring tape. Note every threshold, its height and its location. That gives you a complete overview of the work ahead.

Removing interior thresholds: step by step

Removing interior thresholds is the most accessible job. In most cases you can do this yourself with basic tools.

What you need

Method

Step 1: Remove the threshold. Cut into the threshold on both sides at the door frame with a multi-tool. Then chisel the threshold loose. Work carefully to avoid damaging the frame.

Step 2: Check the floor level. Measure whether the floor on both sides of the frame is at the same height. Is there a level difference? Then you need to resolve that first with a self-levelling compound or a build-up layer.

Step 3: Fill the gap. Where the threshold was, a groove remains in the floor. Fill this with a matching strip of wood, levelling compound or a transition strip. Which option you choose depends on your floor type.

Step 4: Fit a transition strip. If you have two different floor types (for example laminate and tiles), use a transition strip. Choose a profile that sits flush with both floor surfaces. A T-profile works well at equal heights, a ramp profile for a small height difference.

Step 5: Seal the edges. Apply a thin layer of sealant along the edges of the profile and the door frame. This prevents moisture or dirt from creeping underneath.

Cost: £15 to £40 per threshold (materials). Allow 30 to 60 minutes per threshold.

Tip: with a wooden floor, you can sometimes plane the threshold flush rather than removing it entirely. That is quicker and you do not need a transition strip.

Removing or lowering a shower threshold

The shower threshold is a different matter. Water drainage plays a crucial role here. You cannot simply remove the threshold without arranging an alternative water barrier.

Option 1: Walk-in shower with a gradient

The best solution is a walk-in shower. You remove the shower tray and threshold entirely and re-lay the entire bathroom floor with a gradient (slope) towards the drain.

What this involves:
– Removing the old shower tray and threshold
– Levelling the floor and applying a waterproof coating or membrane
– Creating a gradient: at least 1 centimetre per metre towards the drain
– Laying new tiles over the entire surface
– Optionally fitting a stainless steel linear drain instead of a point drain

Cost: £700 to £2,200 (depending on size and whether you re-tile the entire bathroom floor).

Build time: 2 to 4 days.

Option 2: Threshold ramp at the shower

Do not want to remove the threshold? Then a threshold ramp is a quick solution. This is a sloped piece of plastic or aluminium that you place against the threshold. You can wheel or walk over it more easily.

Advantages: inexpensive (£18 to £70), quick to install, no demolition work.

Disadvantages: the threshold is still there, you have only softened the transition. For higher thresholds it remains difficult with a wheelchair.

Option 3: Lowering the threshold

You can lower an existing shower threshold by grinding down the top with a diamond blade. This only works with masonry or concrete thresholds. You can reduce the threshold to 1 or 2 centimetres and catch the remaining water barrier with a shower profile or rubber strip.

Cost: £45 to £130 (materials).

Note: this is dusty work. Use an angle grinder with dust extraction and wear a dust mask. Cover the rest of the bathroom with dust sheeting.

Walk-in shower with level-access transition and stainless steel linear drain in a renovated bathroom

Exterior thresholds and the zero threshold

The exterior threshold is technically the most challenging. The height difference between inside and outside has a function: it keeps rainwater out. If you remove the threshold without an alternative water barrier, you risk water damage.

How a zero threshold works

A zero threshold is a construction where the interior floor and the exterior paving are at the same level, with a water-resistant solution in between. The most commonly used method:

Drainage channel directly in front of the threshold. A narrow stainless steel or aluminium channel on the outside of the door catches rainwater before it reaches the threshold. The channel is connected to the rainwater drainage system.

Raised water barrier in the frame. Modern zero-threshold frames have a built-in water barrier of 2 to 3 centimetres that sits within the frame profile. It does not protrude above the floor but still holds back water.

Gradient away from the door. The exterior surface (patio, path) slopes gently away from the door. At least 1.5 centimetres per metre over the first metre.

Adapting an existing exterior threshold

For existing homes you have two options:

1. Fit a threshold ramp. A ramp on the inside, outside or both sides of the threshold. This is the quickest and cheapest solution. Cost: £25 to £100 per threshold. Suitable for thresholds up to about 7 centimetres.

2. Replace the frame and threshold. For a larger renovation you can replace the entire frame with a zero-threshold frame. This is a significant investment (£1,300 to £3,000 per door including fitting), but the result is a permanent, watertight zero threshold.

Making sliding doors step-free

With sliding doors the problem lies in the bottom rail. Standard sliding doors have a rail that protrudes above the floor. There are two solutions:

Recessed rail. For new builds or a complete renovation you can choose a sliding door with a recessed rail. The rail is embedded in the floor and does not protrude. You need to specify this when purchasing the sliding door.

Threshold transition piece. For existing sliding doors you can fit a bevelled transition over the rail. This makes the transition smoother but does not completely eliminate the threshold.

Threshold ramps: the quick fix

Not everyone can or wants to remove thresholds. Threshold ramps are then a practical interim solution. They cost little, are quick to fit and involve no demolition work.

Types of threshold ramps

Indoor ramps. Plastic or rubber wedges that you place against the threshold. They create a gradual transition. Available for thresholds from 1 to 7 centimetres.

Outdoor ramps. Aluminium or plastic ramps, often with a non-slip surface. Weather resistant. Some models are adjustable in height.

Foldable threshold ramps. Collapsible for when you do not want a permanent ramp. Handy for rented properties.

Portable ramp plates. For occasional use, for example when a wheelchair user visits. Not suitable as a permanent solution.

What to look for when buying

Cost: £15 to £100 per piece, depending on material and size.

Grants and financial support

Making your home step-free can sometimes be partially funded. Here are the options:

Local authority Disabled Facilities Grant (DFG). If you have a disability that makes living at home difficult, you can apply to your local council for home adaptations. Removing thresholds often falls under this. The council assesses each situation on its merits. In England and Wales, the maximum DFG is £30,000; in Scotland it is £36,000.

Home improvement loans. Various councils and charities offer low-interest or interest-free loans specifically for home adaptations that enable independent living longer. Check with your local authority or a national charity such as Age UK.

Occupational therapy referrals. Your GP can refer you to an occupational therapist who may recommend adaptations. This can speed up your application for council-funded work.

Insurance or health cover. In some cases, mobility aids such as threshold ramps may be covered by your health insurance or provided by the NHS. Ask your GP or local wheelchair service.

Tip: always apply before you start the work. Most schemes require prior approval. Retrospective applications are generally refused.

Frequently asked questions

What is the maximum threshold height for new builds?

Under UK Building Regulations (Approved Document M), thresholds at entrances to new-build dwellings should generally not exceed 15 mm. Many builders now aim for a true zero threshold of 0 millimetres.

Can I remove thresholds in a rented property?

Only with the landlord’s permission. Where there is a medical need, you may be able to apply for a Disabled Facilities Grant. A landlord cannot unreasonably refuse a request for disability adaptations, but you may need to restore the property to its original condition when you leave.

Will my house leak if I remove the exterior threshold?

Not if you do it properly. A drainage channel in front of the door, a slope away from the building and a good frame profile with a built-in water barrier prevent water ingress. A zero threshold is not the same as no water barrier.

How much does it cost to make my entire home step-free?

For a typical mid-terrace house with 6 to 8 interior thresholds, a shower threshold and two exterior thresholds, budget £450 to £1,300 if you do it yourself (interior thresholds and ramps only). If you also want the shower and exterior doors done professionally, expect £2,500 to £7,000.

Is step-free building compulsory during a renovation?

That depends on the scope of the renovation. Under UK Building Regulations, a major renovation that involves structural changes may trigger requirements for reasonable accessibility improvements. For smaller works, existing building standards apply, which are less strict. Check with your local Building Control office.

What is the difference between a threshold ramp and a zero threshold?

A threshold ramp is an aid that you place over or against an existing threshold. The threshold itself remains. A zero threshold is a structural solution where there is genuinely no height difference. A zero threshold is permanent and superior; a threshold ramp is a quick interim fix.

Conclusion

Step-free building does not have to be a major project. You can remove interior thresholds in about an hour each with a multi-tool and a transition strip. Threshold ramps start from as little as fifteen pounds. And even tackling a shower threshold is a job of a few days.

Exterior thresholds are the most challenging because of the water barrier, but there are good solutions for those too. From a simple threshold ramp to a full zero-threshold frame.

Start with a walk through your home. Measure every threshold. Tackle the interior thresholds first — that delivers the quickest results. And remember: what you invest in accessibility now, you get back later in comfort and property value.


Check out our DIY plans at fredsdiyplans.com for more home improvement projects.

Leave a Reply

Your email address will not be published. Required fields are marked *