The average household uses around 150,000 litres of mains water per year. Over 40% of that goes to applications where rainwater works perfectly well: flushing the toilet, running the washing machine, watering the garden and washing the car. With a rainwater harvesting system, you can save 30,000 to 50,000 litres of mains water per year — worth 60 to 150 euros on your water bill. A simple rainwater system with an IBC tank and hand pump can be installed for 200 to 500 euros. A complete system with an underground tank, pressure pump and toilet connection costs 1,500 to 4,000 euros but saves money year after year. In this article, you’ll learn which system suits your situation, what the costs are, how to install it yourself and how much you’ll actually save.
What does rainwater harvesting cost? Overview by system
The costs of rainwater harvesting vary widely, depending on storage capacity, tank type and whether you use the water outdoors only or indoors as well (toilet, washing machine).
Cost table for rainwater harvesting
| System | Material costs | Installation (DIY) | Installation (professional) | Savings per year |
|---|---|---|---|---|
| Water butt 200–400 L (garden use) | £25 – £130 | 1–2 hrs | £80 – £200 | £10 – £25 |
| IBC tank 1,000 L (garden use + pump) | £130 – £350 | 2–4 hrs | £200 – £400 | £25 – £70 |
| Above-ground rainwater tank 1,500–3,000 L | £350 – £1,000 | 4–8 hrs | £500 – £1,200 | £40 – £100 |
| Underground tank 3,000–5,000 L (garden + toilet) | £1,000 – £2,500 | 2–3 days | £2,000 – £4,000 | £70 – £130 |
| Complete indoor system (toilet + washing machine) | £1,700 – £3,500 | 3–5 days | £3,500 – £7,000 | £80 – £170 |
The payback period for a simple system (IBC tank with pump for garden use) is between 2 and 5 years. A complete indoor system with underground tank pays for itself in 10 to 20 years, but also delivers environmental benefits and reduced strain on the sewerage system.
How much rainwater can you collect from your roof?
Your rainwater yield depends on three factors: roof area, annual rainfall and the type of roofing material. In the UK, average annual rainfall is 800 to 1,200 mm depending on region.
The formula for rainwater yield:
Collection (litres) = roof area (m²) × rainfall (mm) × runoff coefficient
The runoff coefficient varies by roof type:
| Roof type | Runoff coefficient |
|---|---|
| Roof tiles (pitched roof) | 0.75 – 0.90 |
| Bitumen/EPDM (flat roof) | 0.80 – 0.95 |
| Metal roof (corrugated, zinc) | 0.90 – 0.95 |
| Green roof (sedum) | 0.30 – 0.50 |
Annual yield by roof area
| Roof area | Yield per year (pitched roof) | Yield per year (flat roof) |
|---|---|---|
| 30 m² | 18,000 – 32,400 litres | 19,200 – 34,200 litres |
| 60 m² | 36,000 – 64,800 litres | 38,400 – 68,400 litres |
| 100 m² | 60,000 – 108,000 litres | 64,000 – 114,000 litres |
A terraced house with 50 m² of roof area easily produces 30,000 to 50,000 litres of rainwater per year. That’s more than enough to flush the toilet all year round (a two-person household uses approximately 12,000 litres per year on toilet flushing) and water the garden.
The bottleneck isn’t the amount of rain — it’s the storage capacity. A 3,000-litre tank bridges dry spells of 2 to 4 weeks, depending on your usage.
Which type of rainwater tank suits your situation?
The choice of tank depends on your budget, available space and intended use (garden only or indoor as well).
IBC tank (1,000 litres)
An IBC tank (Intermediate Bulk Container) is the most popular choice for DIYers. This plastic tank in a metal frame was designed for industrial transport and is available second-hand for 40 to 130 pounds.
Suitable for: garden watering, car washing, topping up ponds, cleaning water.
Advantages:
– Cheap and widely available (online marketplaces, packaging dealers)
– Large volume (1,000 litres) in a compact format
– Standard drain tap included (2-inch connection)
– Easy to link: two IBC tanks give 2,000 litres of storage
Disadvantages:
– Not UV-resistant: the plastic inner tank becomes brittle in direct sunlight. Place the tank in the shade or clad it with timber.
– Not suitable for indoor use without additional filtration
– Always check the label: only use tanks that previously held foodstuffs or clean liquids. Never reuse an IBC tank that contained chemicals, pesticides or unknown substances.
Costs for a complete IBC rainwater setup:
– IBC tank second-hand: £40 – £130
– Downpipe connection + filter: £15 – £35
– Overflow connection: £8 – £15
– Submersible pump (optional): £25 – £80
– Total: £88 – £260
Above-ground rainwater tank (1,500 – 5,000 litres)
Purpose-built rainwater tanks made from polyethylene (PE) are UV-resistant, lightproof (preventing algae growth) and designed for long-term outdoor use. They’re available in volumes from 1,500 to 5,000 litres.
Suitable for: garden use and as a feed for an indoor system (with additional pressure pump and filters).
Advantages:
– UV-resistant and lightproof
– Longer lifespan than IBC tanks (15–25 years)
– Available with integrated filter and overflow connection
– Suitable as a source for indoor systems
Disadvantages:
– More expensive than IBC tanks (£250 – £1,000 for 1,500 – 3,000 litres)
– Take up above-ground space
Underground tank (2,000 – 10,000 litres)
An underground tank is the best option if you want to use rainwater indoors (toilet, washing machine) or have no above-ground space. The tank is buried in the garden and connected via a pressure pump.
Suitable for: complete rainwater harvesting systems with indoor use.
Advantages:
– Invisible after installation
– No above-ground space required
– Large storage capacity possible (up to 10,000 litres and more)
– Stable water temperature (no freezing in winter at sufficient depth)
Disadvantages:
– Excavation required (manual or with a mini digger)
– Higher purchase costs (£700 – £2,500 for 3,000 – 5,000 litres)
– Harder to inspect and maintain
– May require planning permission in some areas for significant groundworks
Components of a rainwater harvesting system
A complete rainwater harvesting system consists of more than just a tank. Below are all the components you need, with price indications.
Filters
Filters keep leaves, roof debris, insects and fine dirt out of your storage tank. The cleaner the water entering the tank, the less maintenance needed and the longer the water remains usable.
| Filter type | Function | Cost |
|---|---|---|
| Leaf guard (gutter) | Keeps coarse leaves out of the gutter | £4 – £12 per metre |
| Downpipe filter (debris separator) | Filters leaves and coarse debris from the downpipe | £15 – £65 |
| Fine filter (100–300 micron) | Filters fine particles for indoor use | £40 – £170 |
| First flush diverter | Diverts the first (dirtiest) litres of rainwater to the drain | £25 – £50 |
For garden use, a leaf guard and downpipe filter are sufficient. For indoor use (toilet, washing machine), you need at minimum a fine filter.
Pumps
Without a pump, your rainwater system delivers water by gravity: that works for filling a watering can, but not for a sprinkler, garden hose or toilet connection.
| Pump type | Pressure | Suitable for | Cost |
|---|---|---|---|
| Submersible pump | 1–3 bar | Garden hose, sprinkler | £25 – £80 |
| Suction pump | 3–5 bar | Garden hose, sprinkler, lawn sprinkler | £65 – £200 |
| Pressure set (with pressure vessel) | 3–5 bar | Indoor use (toilet, washing machine) | £120 – £350 |
For indoor use, a pressure set is essential. It delivers constant pressure and switches on automatically when you flush the toilet or the washing machine draws water.
Pipework and connections
| Component | Cost |
|---|---|
| Downpipe connection (T-piece or diverter) | £6 – £20 |
| Supply pipe (tank to pump) | £1.50 – £4 per metre |
| Overflow pipe | £2.50 – £8 per metre |
| Pressure pipe (pump to point of use) | £2.50 – £7 per metre |
| Non-return valve | £8 – £20 |
| Float switch (dry-run protection) | £12 – £25 |
| Taps, couplings, hose clips | £15 – £40 total |
Installing rainwater harvesting yourself: two options
Option 1: Simple outdoor system (IBC tank + pump)
This is the entry-level setup that most DIYers choose. You collect rainwater in an IBC tank and use it for the garden, car and outdoor tasks.
Materials needed:
– IBC tank 1,000 litres (second-hand): £40 – £130
– Downpipe filter: £15 – £50
– T-piece or downpipe connection: £8 – £20
– Supply hose: £4 – £12
– Overflow hose + connection: £8 – £15
– Submersible pump: £25 – £80
– Platform (concrete slabs or timber frame): £8 – £25
– Total: £108 – £332
Steps:
1. Choose a spot near a downpipe, preferably in the shade. Ensure the ground is level and stable.
2. Place the IBC tank on a platform 20–30 cm high (concrete slabs or timber base).
3. Cut the downpipe at the desired height (above the top edge of the tank). Fit the T-piece and connect the supply hose to the tank inlet.
4. Fit the downpipe filter above or within the connection.
5. Drill a hole for the overflow near the top of the tank. Connect an overflow hose leading back to the drain or to a second tank.
6. Place the submersible pump in the tank and connect a garden hose to the pump outlet.
7. Test the system using a garden hose at the gutter. Check that water flows through properly, the overflow works and there are no leaks.
Time investment: 2 to 4 hours.
Option 2: Complete indoor system (underground tank + toilet + washing machine)
This system supplies rainwater to your toilet and optionally your washing machine. It saves 30 to 50% of your mains water consumption.
Materials needed:
– Underground PE tank 3,000 – 5,000 litres: £700 – £2,000
– Downpipe filter(s): £30 – £100
– First flush diverter: £25 – £50
– Fine filter (100 micron): £40 – £130
– Pressure set with vessel: £120 – £350
– Float switch: £12 – £25
– Non-return valve: £8 – £20
– PE pipework (supply + return): £40 – £130
– Mains water backup (automatic top-up valve): £25 – £65
– Excavation (self or with mini digger): £0 – £250
– Total: £1,000 – £3,120
Steps:
1. Determine the location for the underground tank. Choose a spot in the garden close to the downpipe and not too far from the house (shorter pipe runs).
2. Dig a pit at least 1.5 metres deep (depending on the tank dimensions). Lay a sand bed of 10–15 cm on the bottom for stable positioning.
3. Lower the tank into the pit. Backfill the space around the tank with sand or gravel (never with clay: it can deform the tank as it expands).
4. Connect the downpipe(s) via filters and the first flush diverter. The supply pipe runs from the downpipe through the filter to the tank inlet.
5. Install the overflow pipe from the tank to the drain or a soakaway.
6. Place the pressure set in a dry room (cellar, utility room, garage). Connect the suction pipe to the tank and the pressure pipe to the separate rainwater circuit.
7. Run a separate pipe circuit to the toilet and optionally the washing machine. This circuit must never be connected to the mains water supply (this is a legal requirement under the Water Supply (Water Fittings) Regulations 1999 in England and Wales, and equivalent regulations in Scotland). Label pipes clearly as “not drinking water”.
8. Install automatic mains water backup: a top-up valve that feeds mains water when the rainwater supply runs out. This ensures you always have water available, even during dry spells.
9. Test the system: flush the toilet, run the washing machine and check pressure, flow and any leaks.
Time investment: 2 to 5 days (excavation is the biggest time commitment).
Important: An indoor rainwater circuit must be completely separate from the mains water supply. This is a legal requirement under the Water Supply (Water Fittings) Regulations 1999. Pipes must be clearly labelled and there must be no physical connection between rainwater and mains water pipes (except via an air gap, such as a top-up tank with a type AA or AB air gap as defined in BS EN 1717).
Rainwater for the toilet: how does it work?
Flushing the toilet is the most cost-effective indoor application for rainwater. An average three-person household uses 15,000 to 20,000 litres per year on toilet flushing. At a combined water and sewerage rate of around £3 to £5 per cubic metre, that’s a saving of £45 to £100 per year — on the toilet alone.
What do you need for a rainwater toilet?
- Storage tank of at least 1,500 litres (underground or above-ground)
- Fine filter (100–300 micron)
- Pressure set with vessel
- Separate pipe circuit to the toilet (PE pipe or plastic)
- Automatic mains water backup (for dry periods)
- Non-return valve and float switch
Connection in practice
The rainwater goes via the pump to a separate supply point at the toilet. You replace the existing mains water connection to the cistern with a connection to the rainwater circuit. The mains water backup ensures the cistern is always filled, even when the rainwater supply is exhausted.
The cost of a rainwater toilet system is between £700 and £1,700 if you install it yourself (tank, pump, filter, pipework). The payback period is 8 to 15 years on water savings alone, but shorter if you combine it with garden watering and the washing machine.
Build it yourself vs. buy a complete system
You have two routes: buy everything separately and assemble it yourself, or buy a ready-made rainwater harvesting package.
Assemble it yourself
Advantages:
– Cheaper: you choose the best value for each component
– Flexible: you build exactly what you need
– IBC tanks available second-hand for a fraction of the new price
Disadvantages:
– You need to work out which components are compatible (hose diameters, couplings, pump capacity)
– No warranty on the overall system
– More prone to installation errors
Cost for a simple system (self-assembled): £108 – £332
Cost for a complete indoor system (self-assembled): £1,000 – £3,120
Buy a complete system
Manufacturers such as Graf, Rewatec and ACO offer complete rainwater harvesting packages: tank, pump, filter, pipe kit and manual all in one box.
Advantages:
– All components are matched to each other
– Clear manual and installation diagrams
– Manufacturer warranty on the system (often 10–25 years on the tank)
– Technical support for queries
Disadvantages:
– More expensive than assembling yourself (20–40% premium)
– Less flexible for bespoke setups
Cost for a complete garden package (1,500 L): £350 – £750
Cost for a complete indoor package (3,000–5,000 L): £2,000 – £4,500
The choice depends on your experience and comfort level. Are you handy and want to save? Assemble it yourself. Want certainty that everything fits and works? Buy a complete package.
Maintenance and lifespan
A rainwater harvesting system is low-maintenance, but not entirely maintenance-free.
Annual maintenance
| Task | Frequency | Time |
|---|---|---|
| Clean gutters | Twice a year (spring + autumn) | 30–60 min |
| Clean or replace filters | 2–4 times a year | 15–30 min |
| Inspect tank for sediment | Once a year | 15 min |
| Check pump | Once a year | 15 min |
| Test overflow | Once a year | 5 min |
Every 5–10 years
- Pump out tank and remove sediment (underground tanks)
- Check pump hoses and couplings for wear
- Replace filters (fine filters)
Lifespan per component
| Component | Expected lifespan |
|---|---|
| Underground PE tank | 25–50 years |
| Above-ground PE tank | 15–25 years |
| IBC tank (second-hand) | 5–15 years |
| Pressure set | 10–15 years |
| Submersible pump | 5–10 years |
| Filters | 2–5 years (depending on type) |
FAQ: rainwater harvesting installation
Do I need planning permission for rainwater harvesting?
An above-ground water butt or IBC tank does not require permission. An underground tank generally doesn’t require planning permission for domestic use on your own property, but check with your local authority. Many councils now offer grants or rebates for rainwater harvesting as part of sustainable drainage (SuDS) initiatives.
Is rainwater suitable as drinking water?
No, not without extensive treatment (UV disinfection, activated carbon filter, fine filtration). Rainwater contains bacteria, algae spores and roof contaminants. For toilet, washing machine and garden use, it’s perfectly suitable.
Can I use rainwater in the washing machine?
Yes, rainwater is soft water (no limescale) and is actually better than mains water for the washing machine. You need less detergent and the machine doesn’t scale up. Connect the washing machine to the rainwater circuit via a separate supply point.
Will my rainwater system freeze in winter?
An above-ground tank or IBC tank can freeze in severe frost. Leave the tap open so the tank can drain, or empty the water before winter. An underground tank won’t freeze if it’s buried at least 60–80 cm deep (below the frost line).
How many litres of storage capacity do I need?
Rule of thumb: allow 50–100 litres of storage per m² of connected roof area if you use rainwater for the garden only. For indoor use (toilet + washing machine), plan for 3,000–5,000 litres for a household of 2–4 people.
Can I get a grant for rainwater harvesting?
An increasing number of local authorities offer grants for rainwater harvesting and disconnection from the sewer system. Amounts vary from £200 to £2,000 depending on the council and system type. Check your local council’s website or look into government sustainability schemes. In some regions, water companies also offer incentives for reducing mains water consumption.
Plans and guides
Want to get started straight away with professional plans and step-by-step guides? Check out our DIY plans at fredsdiyplans.com for more home improvement projects.
