You flush the toilet. Six litres of clean, treated drinking water disappear down the drain. You do that roughly six times a day. That is 36 litres of potable water — filtered, purified, tested — straight into the sewer. Every single day.

Meanwhile, water companies across England and Wales are warning of serious supply deficits by 2050, and several regions already face summer hosepipe bans almost every year. The average household water bill rose by around 6% in 2025–2026, with further increases expected. Everyone looks to the water companies and the government. But you could also look at your own roof. Or your shower.

Grey water recycling and rainwater harvesting are no longer fringe ideas. They are practical systems you can install yourself, that cut your water bills and that reduce pressure on the mains supply. This article explains how to do it, what it costs, and which regulations you need to follow.

What exactly is grey water?

Grey water is lightly contaminated household water. It comes from:

Grey water is NOT:

The distinction matters. Grey water is relatively clean and, after simple filtering, can be reused for applications that do not require drinking-water quality.

What can you use grey water and rainwater for?

Application Suitable water Saving per year
Toilet flushing Grey water or rainwater 10,000 – 15,000 litres
Garden watering Rainwater or filtered grey water 5,000 – 20,000 litres
Washing machine Rainwater (filtered, naturally soft) 5,000 – 8,000 litres
Car washing Rainwater 500 – 1,500 litres
Cleaning (floors) Rainwater 1,000 – 2,000 litres

Total saving: an average household can replace 30 to 50% of its mains water usage with grey water or rainwater. That is 20,000 to 50,000 litres per year.

At the current average combined water and sewerage bill of roughly £480 per year (2026), that translates to a saving of around £150 to £240 annually. Not a fortune, but the system pays for itself and you reduce your environmental impact at the same time.

Option 1: DIY rainwater harvesting

Rainwater harvesting is the simplest way to reuse water. You collect rain that falls on your roof, store it, and use it for the toilet, garden or washing machine.

What do you need?

Component Function Cost
Water butt (200–500 litres) Above-ground storage, simplest option £25 – £120
Underground tank (1,500 – 5,000 litres) Larger storage, frost-protected £400 – £2,000
Gutter filter / leaf guard Prevents debris entering the water £15 – £60
Fine filter (100 micron) Filters fine particles for household use £25 – £80
Submersible pump or booster set Pumps water from the tank to the pipework £70 – £250
Pipework (MDPE pipe) Separate supply system £40 – £160
Overflow provision Drainage when the tank is full £15 – £40
Mains top-up unit (optional) Automatically tops up with mains water when the tank is empty £120 – £350

Basic installation: water butt for the garden

The simplest setup: a water butt beneath your downpipe. Costs under £80 and can be installed in an hour.

  1. Choose a water butt of at least 200 litres
  2. Cut the downpipe at the desired height
  3. Fit a rainwater diverter (automatically bypasses the butt when it is full)
  4. Place the butt on a stand (for adequate water pressure to a garden hose)
  5. Connect a tap at the bottom of the butt

This is sufficient for garden watering. No pump needed, no pipework.

Extended installation: rainwater for toilet and washing machine

If you want to use rainwater for toilet flushing and the washing machine, you need a more substantial system.

Step 1: Choose and install the tank

An underground tank of 3,000 to 5,000 litres is ideal for an average household. The tank is buried in the garden, frost-protected at a minimum depth of around 750 mm.

Step 2: Filtration

Step 3: Pump and pipework

Step 4: Mains top-up unit

When the tank runs dry (a long hot summer), it needs to be topped up automatically with mains water. A top-up unit does this via a Type AA or AB air gap, ensuring there is no possibility of backflow into the mains supply.

Cost overview: rainwater harvesting

Type of installation Material cost DIY? Professional installation
Water butt + garden £40 – £120 Yes, straightforward n/a
Underground tank + toilet £800 – £2,000 Yes, with experience £2,500 – £4,000
Complete system (toilet + washing machine + garden) £1,200 – £3,000 Yes, with plumbing experience £3,500 – £6,000

Option 2: Installing a grey water system

A grey water system collects wastewater from the shower, bath and/or washbasin, filters it, and reuses it for toilet flushing.

How does it work?

  1. Collection: the waste pipe from the shower/bath is diverted to a collection tank (usually in a cellar, utility room or under the floor)
  2. Filtration: the water passes through a filter (mechanical, biological or both)
  3. Storage: treated water is held in a buffer tank
  4. Distribution: a pump feeds the water to the toilet cisterns

Types of grey water system

Type How it works Price Water quality
Simple filter (mechanical) Screens coarse debris, no disinfection £250 – £650 Basic — suitable for toilet flushing
Biological filter system Bacteria break down organic matter £650 – £1,600 Good — suitable for toilet + garden
Membrane filtration (MBR) Ultra-fine filtering + UV disinfection £1,600 – £4,000 High — suitable for washing machine

DIY installation: what is involved?

A simple grey water system can be installed yourself if you have plumbing experience.

Materials needed:

Installation in 8 steps:

  1. Choose the location for the collection tank (cellar, utility room or under-floor void)
  2. Divert the waste pipe from the shower/bath to the collection tank (tee fitting in the existing waste pipe)
  3. Install a coarse filter (hair trap) before the tank
  4. Position the collection tank with an overflow connection to the drain
  5. Install the filter unit after the tank
  6. Fit the pump with float switch
  7. Run a separate supply pipe to the toilet cisterns (label the pipe “NOT DRINKING WATER”)
  8. Install a mains top-up connection with an air gap as backup

Maintenance: clean the filter monthly, flush the tank annually, check the pump is working correctly.

Grey water system costs

Component Cost
Collection tank 200 litres £65 – £160
Filter unit (mechanical) £80 – £320
Pump with float switch £65 – £160
Pipework + fittings £40 – £120
Non-return valve + isolating valves £25 – £50
Total materials £275 – £810
Professional installation £400 – £800 on top

Regulations: Water Fittings Regulations and backflow prevention

This is the most important section of this article. Recycled water (grey or rain) must never come into contact with the mains drinking water supply. In England and Wales, this is governed by the Water Supply (Water Fittings) Regulations 1999 and BS EN 16941. In Scotland, the Scottish Water Byelaws apply similar requirements.

The key rules

  1. Separate pipework systems: recycled water must run through a completely separate pipework circuit. No tee connections, no cross-connections, no shared pipes with the mains supply.

  2. Air gap (Type AA or AB): where recycled water and mains water meet (at the top-up unit), an air gap is required. This is a physical break of at least 20 mm between the mains water outlet and the maximum water level in the tank, preventing any possibility of backflow.

  3. Marking: all pipes carrying recycled water must be clearly marked. Use blue or green MDPE pipe, or apply “NOT DRINKING WATER” labels to existing pipework. BS 1710 specifies the colour coding.

  4. Taps and draw-off points: any tap or outlet supplying recycled water must carry a warning notice. Under the Regulations, outlets must not be fitted with connections that could allow a garden hose to be attached to a non-potable supply.

  5. Notification: you must notify your water company before installing a rainwater harvesting or grey water system that connects to the internal plumbing. Under the Water Fittings Regulations, advance notice of at least ten working days is required. The water company may inspect the installation.

What happens if you get it wrong?

If recycled water flows back into the mains supply, you could contaminate the drinking water for your neighbours and the wider network. This is a serious public health risk. Water companies have the legal power to disconnect your supply or require removal of a non-compliant installation. You could also face prosecution under the Water Industry Act 1991.

Grants, incentives and savings

Water company schemes

Some water companies offer free or subsidised water butts and other water-saving devices. For example:

Check your own water company’s website under “save water” or “water efficiency”. Offers change regularly.

Reduced surface water drainage charge

If you disconnect your rainwater from the public sewer (by harvesting it or using a soakaway), you may be entitled to a reduction in your surface water drainage charge. This is part of your sewerage bill and the reduction varies by company, but is typically £20 to £50 per year. Contact your water company to apply.

Planning permission

A standard water butt does not require planning permission. Underground tanks are generally permitted development, but check with your local planning authority if you are in a conservation area or if the tank is very large. Building Regulations approval is not usually required for rainwater or grey water systems used only for toilet flushing and garden watering, but you should ensure the installation complies with Part G (Sanitation, Hot Water Safety and Water Efficiency) and Part H (Drainage and Waste Disposal).

Rainwater vs. grey water: which is right for you?

Criterion Rainwater harvesting Grey water system
Installation complexity Moderate High
Entry cost Low (water butt £40) to moderate Moderate to high
Water quality Good (low contamination) Fair (soap, skin cells)
Availability Depends on rainfall Constant (every shower)
Maintenance Minimal Monthly filter cleaning
Best for Garden, toilet, washing machine Toilet
Suitable for a flat Difficult (no private roof) Possible (small systems)

Recommendation for beginners: start with a water butt for the garden. It costs next to nothing, takes an hour to set up, and introduces you to water recycling. If you like it, you can scale up to an underground tank or add a grey water system.

Frequently asked questions

Does grey water smell?
After 24–48 hours, untreated grey water can start to smell due to bacterial growth. That is why it is important to process it quickly or to choose a system with biological filtration. Modern systems keep the water fresh.

Can I drink rainwater?
Technically yes, after thorough filtration and UV disinfection. But in the UK there is no need. Mains tap water is of excellent quality and much cheaper than the treatment costs for making rainwater potable.

What if it doesn’t rain for a long time?
A properly designed system includes a mains top-up unit that switches automatically to mains water when the tank is empty. You will not notice a thing — the toilet keeps flushing as normal.

Can I use grey water in the garden?
Yes, provided it is well filtered and you do not spray it on edible crops that are eaten raw. Use it for lawns, shrubs and ornamental planting.

How large should my rainwater tank be?
Rule of thumb: 1,000 litres per 25 m2 of roof area. For a typical mid-terrace house (around 50 m2 of roof), a tank of 2,000 to 3,000 litres is a sensible choice.

Sources


Check out our DIY plans at FredsDIYPlans.com for more home improvement projects.

Leave a Reply

Your email address will not be published. Required fields are marked *