Installing a smart thermostat is one of the quickest ways to bring your heating bill down. We’re talking 15 to 30 per cent savings per year. For an average household, that’s roughly £230 to £460 you keep in your pocket. Every single year.

And the best part? You hang it up yourself. No installer needed, no fuss. In this article, I’ll walk you through everything: which thermostat suits you, what it costs, how to fit it yourself, and when you’ll have earned back your investment.

What actually is a smart thermostat?

A smart thermostat replaces that old box on your wall. But instead of a simple dial or a few buttons, you get a device that connects to your phone via Wi-Fi. And that’s where the magic happens.

It tracks when you’re home, checks the weather forecast, and learns from your habits. Rather than your heating blindly kicking in at 7 in the morning — even on days you’re not home — a smart thermostat adjusts automatically.

How does it save 15 to 30 per cent on heating?

The savings come from three areas:

Automatic schedules. The thermostat learns when you’re home and when you’re not. After a week or two, it automatically adjusts the heating schedule. No more heating an empty house.

Geofencing. Using the GPS on your phone, the thermostat knows whether you’re on your way home. It only fires up the heating when you’re getting close. And when you leave, it turns it back down. Simple and brilliant.

Weather prediction. Smart thermostats look at the outside temperature. On an unexpectedly warm day in March, the heating doesn’t need to be running full blast. The thermostat sorts that out for you.

On top of that, you always have oversight via the app. You can see exactly how much energy you’re using, per day, per week, per month. That awareness alone makes people heat less. Research by the Energy Saving Trust confirms that a smart thermostat combined with conscious heating habits can deliver 20-30% savings on heating costs.

OpenTherm vs on/off: what you need to know

This is the most important technical point. And it’s actually simpler than it sounds.

Your boiler works in one of two ways:

On/off. The boiler is either on or off. Nothing in between. The thermostat says: “it’s too cold, start heating.” The boiler fires up at 100%. Warm enough? Boiler off. This is the old way. Think of it like driving in the city: constantly accelerating and braking. Not efficient.

OpenTherm. The boiler can modulate. It adjusts its output. When it’s nearly warm enough, the boiler runs at 30% instead of 100%. That’s much more efficient, because the boiler runs longer at a low temperature. Like using cruise control on the motorway. Nice and steady, nice and economical.

The extra saving from OpenTherm on top of the smart thermostat is 5 to 15 per cent. So if your boiler supports OpenTherm, you want a thermostat that does too. All the thermostats in this article support OpenTherm.

How do you know if your boiler has OpenTherm? Check your boiler’s manual, or look up the model number. Most condensing boilers made after 2005 from brands like Worcester Bosch, Vaillant, Ideal, Baxi and Viessmann support it. If in doubt: check whether there are two thin wires running to your current thermostat. Two wires usually means OpenTherm-ready.

Smart thermostats compared: Nest, Tado, and more

There are a handful of brands that dominate the UK market. I’ve put them side by side.

Thermostat installation

Comparison table

Brand & Model Price (approx.) OpenTherm Self-learning Geofencing Room sensors App score
Google Nest Learning £219 Yes Yes Yes Yes (separate, £119/each) 4.3/5
Tado V3+ £170 Yes No (schedules) Yes Yes (separate, £70/each) 4.1/5
Netatmo £150 Yes No (schedules) Yes (via app) Yes (separate, £60/each) 3.9/5
Honeywell Lyric T6R £135 Yes No Yes No 3.8/5
Hive Thermostat £179 (or subscription plans) Yes No Yes No 3.7/5

A quick look at each brand

Google Nest Learning Thermostat. The best-known smart thermostat on the market. It learns your schedule after a week or two and adjusts automatically. Sleek design, easy installation, works with Google Home. Downside: it’s the priciest option, and the room sensors cost a fair whack on top. But if you want a thermostat that truly runs itself, this is the one.

Tado V3+. Popular across Europe and for good reason. Excellent geofencing, OpenTherm support, and the option to control each room individually with extra sensors. Slightly less “smart” than the Nest because it doesn’t learn on its own — you set schedules via the app. But those schedules combined with geofencing work brilliantly. Best value for money if you want multi-zone control.

Netatmo. The budget-friendly choice with solid specs. OpenTherm, geofencing via the app, and relatively cheap room sensors. Works with Apple HomeKit, which is a big plus for iPhone users. The design is a bit basic compared to the Nest or Tado, but the functionality is spot on.

Honeywell Lyric T6R. Solid brand, reliable thermostat. No room sensors, but for anyone who simply wants a good smart thermostat without the bells and whistles, this is a fine choice. Geofencing works well. The cheapest option in this overview.

Hive Thermostat. A popular choice in the UK, backed by British Gas. You can see your heating usage in the app and control everything remotely. Downside: not self-learning, and you may need a subscription for some features. For those who want straightforward smart heating control from a well-known UK brand, Hive is a solid option.

Which heating systems are compatible?

Before you order, you’ll want to know whether the thermostat works with your boiler. The good news: most modern central heating boilers are perfectly compatible. But there are differences.

Heating system Smart thermostat? Things to note
Combi boiler with OpenTherm Yes, all brands Best combination, maximum savings
Combi boiler without OpenTherm (on/off) Yes, all brands Works, but no modulation. Less savings
District heating Limited Only if you have your own thermostat. Check with your supplier
Heat pump Yes, some brands Tado and Netatmo have heat pump modes
Underfloor heating Yes Works well. Set the thermostat to slow response time
Old boiler (pre-2000) Limited On/off usually works, OpenTherm often doesn’t

In short: got a condensing boiler made after 2005? You’re good to go with any brand. Got a heat pump or district heating? Check the specs of the brand you’re looking at.

Installing a smart thermostat yourself: step by step

And now the fun part. This is genuinely a 30 to 60-minute job. No plumber needed, no electrician. If you can put up a shelf, you can do this.

What you’ll need

Step 1: Turn the heating off

Turn the thermostat down and wait until the boiler stops firing. This is purely a precaution. There are no dangerous voltages on the wires to your thermostat (it’s 24V or less), but you don’t want the boiler kicking in halfway through the job.

Step 2: Remove the old thermostat

Unscrew your old thermostat and carefully pull it away from the wall. You’ll now see two or more wires coming out of the wall. In most installations, there are two.

Important: take a photo of the wiring before you disconnect anything. Always do this. That way you can always go back if something goes wrong. Then disconnect the wires from the old thermostat. The wires stay poking out of the wall.

Step 3: Fit the mounting plate

Every smart thermostat comes with a mounting plate (also called a “backplate”). Screw it onto the wall, in the same spot as your old thermostat. The wires come through the hole in the plate.

Is the new thermostat going in a different spot? Then you’ll need to drill a new hole. But in most cases, you simply use the existing position and screw holes.

Step 4: Connect the wires

This sounds more exciting than it is. You connect the two wires to the terminals on the mounting plate. With OpenTherm, it doesn’t matter which wire goes where. There’s no positive or negative.

For an on/off connection, it’s also two wires, but check the thermostat’s manual for which terminal is which. Push the wires firmly into the clips or screw them in, depending on the type of connection.

Step 5: Click the thermostat onto the plate

Click or slide the thermostat onto the mounting plate. With the Nest, you twist it on; with Tado, you click it into place. The thermostat will start up automatically.

Step 6: Set up the app and pair

Open the app on your phone and follow the steps:

  1. Create an account or log in
  2. Add the thermostat via Wi-Fi
  3. Select your heating system type (OpenTherm or on/off)
  4. Set up a schedule (or let the Nest learn)
  5. Activate geofencing

Done. From now on you control your heating from your phone, the thermostat adapts to your routine, and you save on energy. The whole process takes an hour at most, including the app setup.

Smart features that make the difference

Smart thermostat app

Beyond the basics, a smart thermostat has a number of features you only truly appreciate once you start using them.

Weekly programme and schedules

You set the temperature you want per day and per time block. Weekdays: heating on at 6:30, back to 15 degrees at 8:00 when you head to work, up again at 17:00. A different schedule at the weekend. This alone saves a lot of energy compared to keeping it at 20 degrees all day.

Geofencing

The killer feature. Using your phone’s GPS, the thermostat knows whether everyone has left the house. If so: heating goes down. Someone heading home? The heating starts up in advance. You don’t have to do a thing. This works best on Tado and Nest. Especially handy if you’ve got an irregular schedule.

Room sensors (multi-zone)

With extra sensors, you control the temperature per room. The bedroom at 16 degrees, the living room at 20. For this you’ll need thermostatic radiator valves per room (with Tado or Netatmo). The investment is higher, but so are the savings. You only heat the rooms you’re actually using. In a larger house with lots of rooms, this pays for itself quickly.

Energy reports

Your app shows how much energy you’re using per day, week and month. With Hive, you can also see your electricity usage. This awareness demonstrably leads to more economical heating. People who see their usage heat less. Simple but effective.

Smart home integration

Most thermostats work with Google Home, Amazon Alexa, or Apple HomeKit. “Hey Google, set the heating to 20 degrees” just works. Handy if you’ve already got other smart home devices running.

Costs vs savings: the sums

Here’s where it gets concrete. What does it cost you, what does it save, and when have you earned back your investment?

The calculation

The average UK household spends around £1,500 per year on gas for heating (2025/2026 figures). With rising energy costs, that figure is only going up.

Savings scenario Percentage Saving per year Payback time (thermostat costing £200)
Minimum (you already heat quite efficiently) 10-15% £150 – £225 11-16 months
Average (normal heating habits) 15-25% £225 – £375 6-11 months
Maximum (often away from home, irregular schedule) 25-30% £375 – £450 5-6 months

Cost comparison by brand

Thermostat Purchase price Installation (DIY) Installation (professional) Annual saving (avg.) Payback time
Google Nest £219 £0 £60 – £120 £225 – £375 7-12 months
Tado V3+ £170 £0 £60 – £120 £225 – £375 5-9 months
Netatmo £150 £0 £60 – £120 £210 – £340 5-9 months
Honeywell T6R £135 £0 £60 – £120 £195 – £320 5-8 months
Hive £179 (or subscription) £0 £60 – £120 £170 – £300 7-13 months

Extras worth considering

Extra Cost Effect
Room sensor (Tado) £70/each Extra 5-10% saving per room you heat less
Room sensor (Nest) £119/each Extra 5-10% saving
Thermostatic radiator valve (Tado/Netatmo) £60 – £85/each Needed for multi-zone control
Wi-Fi extender £25 – £50 No direct saving, but needed if signal is weak

The full picture over 5 years

Scenario Investment Saving (5 years) Net benefit
Tado V3+ (basic) £170 £1,125 – £1,875 £955 – £1,705
Tado V3+ with 3 room sensors £380 £1,460 – £2,340 £1,080 – £1,960
Google Nest (basic) £219 £1,125 – £1,875 £906 – £1,656
Netatmo (basic) £150 £1,050 – £1,700 £900 – £1,550

It’s a no-brainer, really. Whichever brand you choose, you’ll earn the investment back within a year and then save hundreds of pounds every year after that.

Grants and schemes for smart thermostats in 2026

Good news: there are a few ways to make the purchase even more affordable.

ECO4 Scheme

The Energy Company Obligation (ECO4) scheme focuses on larger energy-saving measures like insulation, boilers and heat pumps. A standalone smart thermostat doesn’t typically qualify on its own. But if you combine the thermostat with other energy efficiency improvements — for example insulation or a heat pump — it may be included as part of the overall package. That’s smart combining.

Local authority grants

Many local councils have their own schemes for energy efficiency. Some offer vouchers or discounts on smart thermostats. Always check your own council’s website or look on the Simple Energy Advice website. This varies by area, so it’s worth a quick search.

Energy supplier offers

Energy suppliers regularly run discount promotions on smart thermostats. British Gas has Hive, of course, but Octopus Energy, EDF and others frequently have deals with Tado or Nest. Before you order, check what your energy supplier is offering. Could easily save you £25 to £40.

Combine for maximum effect

Combine the purchase of a smart thermostat with other small measures for the biggest savings:

That combination can cut your total heating costs by 30-40%. And it all costs you less than £250.

Common mistakes

A quick list of things people trip up on. So you get it right first time.

Wires not properly secured. If the thermostat keeps losing its connection to the boiler, check that the wires are firmly in the terminals. This is by far the most common issue.

Wi-Fi signal too weak. The thermostat needs to be connected to your Wi-Fi. Is it far from the router? Consider a Wi-Fi extender. Without stable Wi-Fi, you lose all the smart features.

OpenTherm not activated. Some thermostats default to on/off mode, even if your boiler supports OpenTherm. Check in the app that OpenTherm is enabled. Otherwise you’re leaving savings on the table.

Wrong location chosen. Don’t hang the thermostat next to a window, above a radiator, or in direct sunlight. It’ll measure the wrong temperature and your boiler will heat too little or too much.

Geofencing not set up. Lots of people install the thermostat and forget to activate geofencing. That’s a shame, because it’s precisely that feature that delivers a big chunk of the savings.

Frequently asked questions

Can I install a smart thermostat myself?

Yes, absolutely. Installation is a 30 to 60-minute job. All you need is a screwdriver. Every brand includes clear instructions and an installation app. You don’t need a plumber or electrician. The wires to your thermostat are low voltage (24V or less), so there’s no danger.

Does a smart thermostat work with underfloor heating?

Yes. All the smart thermostats mentioned work with underfloor heating. The only difference is that underfloor heating responds more slowly than radiators. Set it up in the app so the thermostat knows you have underfloor heating — it will then start warming up earlier to compensate.

Do I need Wi-Fi?

Yes, a stable Wi-Fi connection is essential. Without Wi-Fi, the thermostat still works as a basic thermostat, but you lose all the smart features: app control, geofencing, weather prediction and energy reports. Make sure your Wi-Fi signal is strong where the thermostat is located.

How much does a smart thermostat save per year?

On average, 15 to 25 per cent on your heating costs, which works out to roughly £225 to £375 per year for an average household. The exact saving depends on your current heating habits, how well-insulated your home is, and whether your boiler supports OpenTherm. Got a large house and you’re often away? You’ll be at the higher end.

Which smart thermostat is the best choice?

That depends on your situation. Want a thermostat that manages everything automatically? Go for the Google Nest. Want the best value for money with multi-zone capability? Tado V3+ is your best bet. Apple user? Netatmo works natively with HomeKit. Just want something reliable without the frills? Honeywell T6R does what it needs to do.

Which smart thermostat suits you?You want a thermostat that manageseverything automatically→Google NestYou want the best value for moneywith multi-zone capability→Tado V3+You are an Apple user (HomeKit)→NetatmoYou just want something reliablewithout the frills→Honeywell T6R
Choices as recommended in this article for the UK market; the right pick depends on your situation.

Can I keep my old thermostat as a backup?

Yes, hang on to your old thermostat. If anything goes wrong with the smart thermostat (breaks down, Wi-Fi outage), you can have the old one back on the wall in a few minutes. The wiring is the same. Costs you nothing and gives you peace of mind.


More tips? Visit fredsdiyplans.com

Leave a Reply

Your email address will not be published. Required fields are marked *