Charging an electric car at a public charger easily costs 40 to 60p per kWh. Charging at home? That’s 22 to 30p per kWh on a standard tariff. And with solar panels on your roof, you charge for practically nothing. The difference adds up to hundreds of pounds per year.
But yes. You need a home charger for that. And then the questions start. Which type? What does it cost? Can my consumer unit handle it? Can I install it myself?
In this article, I lay out everything. From checking your electrical panel to the day you plug in. No jargon, no waffle.
Why a Dedicated Charger and Not Just a Plug Socket?
Let’s start right there. Because that’s the first question everyone asks.
Technically, you can charge an electric car via a standard plug socket with a granny charger (Mode 2). But that’s like filling a swimming pool with a garden hose. It works. It just takes forever.
A standard socket delivers a maximum of 2.3 kW. That means 15 to 20 hours of charging for a full battery. On top of that, a normal socket isn’t designed for hours of heavy continuous use. Overheating is a real risk.
A dedicated EV charger (Mode 3) delivers 7 kW to 22 kW. Your car goes on the charger in the evening and is full by morning. Safe, fast and more efficient.
In short: a plug socket is an emergency solution. A home charger is the real solution.
What Do You Need Before Installing an EV Charger?
Before ordering a charger, you need to check a few things. These are the basics.
Single-Phase or Three-Phase Supply
Most UK homes have a single-phase supply with a 60A or 80A main fuse. With that, you can use a 7 kW charger — which is the standard for UK homes.
Have a three-phase supply? Then you can install an 11 kW or even 22 kW charger. Three-phase is less common in UK residential properties but found in some larger or newer homes.
Not sure? Check your consumer unit or ask your Distribution Network Operator (DNO). Your electricity meter label will usually indicate the supply type.
Capacity of Your Consumer Unit
Your consumer unit needs enough capacity to feed a charger without overloading other circuits.
Rule of thumb:
– Single-phase, 60A: a 7 kW charger (32A) fits in most cases, as long as you’re not running the oven, tumble dryer and kettle simultaneously
– Single-phase, 80A or 100A: a 7 kW charger fits comfortably
– Three-phase: suitable for 11 kW or 22 kW charging
An electrician always checks this before installation. If in doubt: get it inspected. It takes about half an hour.
Location of the Charger
The charger should ideally be as close to your consumer unit as possible. The longer the cable run between consumer unit and charger, the higher the installation cost.
Car on the driveway next to the house? Ideal. Cable needs to run through the loft to the back of the house? It gets pricier.
No off-street parking? It’s trickier. You may need a charging solution mounted to the front wall with a cable channel across the pavement, or a dedicated on-street charging point via your local council.
What Types of Home EV Chargers Are There?
There are three common power levels for home chargers. Each with their own pros and cons.
7 kW (single-phase, 32A)
This is the most popular home charger in the UK. Suitable for virtually any home with a standard single-phase supply.
- Charging speed: roughly 25-30 miles of range per hour of charging
- Full battery (60 kWh): about 8.5 hours
- Suitable for: daily commuting, average driving (30-50 miles per day)
- Requires: single-phase supply, minimum 60A main fuse
For most people, this is more than enough. Plug in at night, full battery by morning.
11 kW (three-phase, 16A)
The step up. Faster charging, particularly useful if you drive a lot or your car has a larger battery.
- Charging speed: roughly 35-40 miles of range per hour of charging
- Full battery (60 kWh): about 5.5 hours
- Suitable for: higher mileage, larger batteries, households with multiple EVs
- Requires: three-phase supply
22 kW (three-phase, 32A)
The maximum for home charging. Sounds attractive, but there are caveats.
- Charging speed: roughly 75-80 miles of range per hour of charging
- Full battery (60 kWh): about 3 hours
- Suitable for: intensive use, business drivers
- Requires: three-phase supply with heavy main fuse, DNO approval may be needed
But note: not every car can charge at 22 kW AC. Many models accept a maximum of 7 kW or 11 kW through the onboard charger. Check your car’s specifications before buying a 22 kW unit. Otherwise you’re paying extra for power your car can’t use.
Cost Comparison: Home EV Charger Installation in 2026
Here’s where it gets concrete. What does a home charger installation actually cost, all in?
Total Cost by Charger Type
| Item | 7 kW (single-phase) | 22 kW (three-phase) |
|---|---|---|
| Charger (purchase) | £400 – £1,000 | £1,000 – £2,200 |
| Installation (standard) | £300 – £600 | £500 – £1,000 |
| Consumer unit upgrade | £0 – £250 | £100 – £400 |
| Cable (per extra metre) | £8 – £15/m | £10 – £20/m |
| Supply upgrade | Rarely needed | Often needed (£300 – £800) |
| Total (indicative) | £700 – £1,850 | £1,900 – £4,400 |
All amounts in GBP, including VAT, 2026 prices.
Cost Comparison: Home Charging vs. Public Charging
| Home charging (own charger) | Public charging | Rapid charging (DC) | |
|---|---|---|---|
| Cost per kWh | £0.22 – £0.30 | £0.40 – £0.65 | £0.65 – £0.85 |
| Cost per 100 miles | £5.50 – £8.00 | £10.00 – £16.00 | £16.00 – £22.00 |
| Cost per year (10,000 miles) | £550 – £800 | £1,000 – £1,600 | £1,600 – £2,200 |
| Convenience | High (always available) | Variable (occupied, queuing) | En route, not daily |
| Battery wear | Low (slow charging) | Low | Higher (with frequent use) |
At 10,000 miles per year, home charging saves you roughly £300 to £800 compared to public charging. The charger pays for itself in 1 to 4 years, depending on the type.
Popular Home Chargers and Their Prices (2026)
| Brand and Model | Power | Smart Features | Guide Price |
|---|---|---|---|
| Ohme Home Pro | 7 kW | App, smart tariff integration, solar | £450 – £600 |
| Wallbox Pulsar Plus | 7 – 22 kW | App, Bluetooth/WiFi, scheduling | £500 – £750 |
| Easee One | 7 – 22 kW | App, load balancing, solar | £650 – £850 |
| Hypervolt Home 3 | 7 kW | App, solar, load management | £600 – £800 |
| Andersen A2 | 7 kW | App, premium design, load balancing | £800 – £1,100 |
| myenergi zappi | 7 – 22 kW | App, solar divert, energy management | £700 – £900 |
Prices exclude installation.
Install It Yourself or Get It Done?
Here’s the honest answer: you cannot legally install an EV charger yourself in the UK.
Mounting the charger unit to the wall? That’s basic DIY. Drill, plug, screw. You can do that yourself.
But the electrical connection — the wiring from the consumer unit, fitting the correct RCD and connecting to the supply — must be done by a qualified electrician. In the UK, this work falls under Part P of the Building Regulations and must be carried out (or certified) by a registered installer (OZEV-approved, NAPIT, or NICEIC).
Why?
- An EV charger draws continuous high currents. A faulty connection is a fire hazard.
- You need a dedicated circuit with the correct RCD protection (Type A or Type B), which a standard circuit doesn’t have.
- Your DNO must be notified of the additional load.
- Your warranty and home insurance may become void with a non-certified installation.
What you can do yourself to save money:
– Physically mount the charger unit (wall/post)
– Run cable channels and conduit
– Dig the trench if the cable needs to go underground
This saves you £100 to £250. Leave the electrical connection to the professional.
Grants for a Home EV Charger in 2026
In 2026, there are several options that can reduce the cost of a home charger in the UK.
OZEV Grant (Electric Vehicle Homecharge Scheme)
The OZEV grant provides up to £350 towards the cost of installing a home charger. Eligibility requirements may change, so check the latest criteria on the GOV.UK website.
Key requirements:
– You must own, lease or have ordered an eligible EV or plug-in hybrid
– Installation must be by an OZEV-approved installer
– The charger must be a smart charger
Scotland-Specific Grants
Energy Saving Trust Scotland offers interest-free loans and cashback for home charger installations. Amounts vary — check the Energy Saving Trust website for current offers.
Employer-Funded Chargers
Driving a company car? Your employer often covers the charger installation. It’s a tax-efficient benefit for the employer and counts as a workplace charging facility.
Check with your HR department. You wouldn’t be the first to charge publicly for months while the boss would have happily paid for a home charger.
Smart Charging: Charging with Solar Panels
This is where it gets really interesting. A smart charger combines home charging with your solar panels. And that saves serious money.
How Does Smart Charging Work?
A smart charger communicates with your inverter (or smart meter) and automatically adjusts the charging power based on solar output.
Plenty of sun? The charger runs at full power.
Cloudy? The power drops.
No sun? The car charges at minimum or pauses.
This is called solar diverting or surplus charging. You only use the excess from your solar panels. Electricity that you’d otherwise export at a low rate goes straight into your car.
What Does It Save?
Quick calculation. Say you have 10 solar panels (4 kWp) and drive 10,000 miles per year.
- Car consumption: roughly 2,500 kWh per year
- Solar panel output: roughly 3,400 kWh per year
- Surplus available for charging: roughly 1,500 – 2,000 kWh (depending on household consumption)
With smart charging, you can drive 60 to 80% of your miles on free solar electricity. That saves you £350 to £500 per year compared to charging on grid electricity.
Which Chargers Support Solar Diverting?
Most smart chargers support this, but not all equally well. Look for:
- Direct communication with inverter (via API) is the most accurate
- CT clamp monitoring works well and is brand-independent
- Energy management systems like myenergi or Home Assistant give the most control
Brands that do this well: myenergi zappi, Ohme, Easee, Wallbox and Hypervolt.
Load Management: Prevent Overloading
An added benefit of a smart charger: load management. The charger monitors the total electricity consumption of your home and automatically adjusts the charging power.
Turn on the oven and tumble dryer? The charger dials back. Switch them off? The charging power goes back up.
This prevents your main fuse from tripping. And you don’t need to upgrade your supply. That saves you £300 to £800 right there.
Timeline: From Order to Charging
How long does the whole process take? Here’s a realistic plan.
Step 1: Preparation (1-2 Weeks)
- Check your consumer unit: single or three-phase, amperage of main fuse
- Decide the charger location
- Choose a charger (type, brand, power)
- Get quotes from 2-3 installers
Step 2: Quote and Planning (1-2 Weeks)
- Installer visits for a site survey (free with most providers)
- You receive a quote with exact costs
- Schedule an installation date
Step 3: Possible Supply Upgrade (2-8 Weeks)
This step can take the longest. If your supply needs upgrading, you must apply to your DNO.
- Cost: £150 to £700 (depending on the work needed)
- Lead time: 2 to 8 weeks (sometimes longer when busy)
Not everyone needs this. With a 7 kW charger on a 60A+ supply, an upgrade is usually not required.
Step 4: Installation (Half Day)
The installation itself takes 2 to 4 hours in a standard situation.
- Mount the charger
- Run cable from consumer unit to charger
- Add a dedicated circuit (RCD Type A or B)
- Connect and test the charger
- Set up the app and pair it
Step 5: DNO Notification (5 Minutes)
After installation, the charger must be registered with your DNO. The installer usually does this for you. If not, you can do it yourself via the online portal.
This is mandatory. The DNO needs to know about the additional load on the network.
Step 6: Charge
Plug in, open the app, away you go. Set up a charging schedule straight away if you have a smart charger — charging during off-peak hours (midnight to 7am) is significantly cheaper on most tariffs.
Total lead time without supply upgrade: 2 to 4 weeks.
Total lead time with supply upgrade: 4 to 12 weeks.
Frequently Asked Questions
Do I need planning permission for an EV charger?
No, for a charger on your own property (driveway, garage, carport) you don’t need planning permission in most cases. It falls under permitted development. Listed buildings and conservation areas may have additional requirements — check with your local planning authority.
Can I install a charger if I’m renting?
Yes, but you need permission from your landlord. Many landlords are open to it, especially if you cover the costs. Put the agreement in writing. When you leave, the charger can often stay as an improvement for the next tenant.
What if my consumer unit is too old?
With an older consumer unit (no RCD protection, rewirable fuses), the unit may need to be upgraded or replaced first. Cost: £400 to £1,200. The installer will identify this during the site survey. It’s a worthwhile investment regardless of the charger.
Can I charge two cars on one charger?
Yes, if you choose a charger with two connectors. Or install two separate chargers with load management, so the available power is automatically shared. Note: the total charging power is divided, so each car charges more slowly.
How much electricity does an electric car use per year?
On average, an electric car uses 3 to 4 kWh per mile. At 10,000 miles per year, that’s 2,500 to 3,500 kWh. For comparison: an average UK household uses 2,700 kWh per year. So your consumption roughly doubles.
Is a home EV charger safe?
Yes, when correctly installed by a qualified electrician. A dedicated charger is safer than charging via a plug socket. The charger has built-in protection (earth fault detection, overcurrent protection, temperature monitoring) and actively communicates with your car about the maximum charging power.
More DIY and home improvement tips? Visit fredsdiyplans.com
