Building a wooden garden table yourself costs €60 to €200 in materials. Ready-made wooden garden tables of comparable quality cost €150 to €600. Building your own saves 50–70% — and you choose exactly the size that fits your terrace. Unlike a picnic table (with fixed benches), a freestanding garden table gives you more flexibility to combine it with separate chairs. In this article you’ll find a complete step-by-step guide for a rectangular wooden garden table.

Build your own vs. buy

Build your own Buy
**4-person garden table (140×80 cm)** €80 – €150 €180 – €450
**6-person garden table (180×90 cm)** €120 – €200 €300 – €700
**Premium hardwood** +€50 – €150 +€200 – €500
**Saving** 50–65% —

Standard garden table dimensions

Persons Tabletop (L x W) Height
**4 persons** 120–140 x 70–80 cm 72–76 cm
**6 persons** 160–180 x 80–90 cm 72–76 cm
**8 persons** 200–220 x 90 cm 72–76 cm

Standard height: 72–76 cm is the ergonomically correct sitting height for most chairs. Check your chair height before you start — a table that’s 5 cm higher or lower than the chairs will be uncomfortable.

Required materials (6-person, 180×90 cm)

Material Dimensions Quantity Price
Douglas fir planks 28×140 mm 180 cm 7 €35 – €60
Timber 70×70 mm (legs) 72 cm 4 €25 – €40
Timber 45×70 mm (cross rails) 86 cm 2 €10 – €15
Timber 45×70 mm (side rails) 140 cm 2 €12 – €18
Timber 45×45 mm (tabletop support) 86 cm 2 €8 – €12
Stainless steel screws 5×80 mm 40 pieces €8 – €15
Stainless steel bolts M10x120 mm + nut + washer Leg joints 8 pieces €10 – €15
Wood oil or exterior stain 1 tin €15 – €25
**Total** **€123 – €200**

Step-by-step guide: build a garden table in 7 steps

Building a 6-person wooden garden table in 7 steps1Create your designAllow at least 80–90 cm of clear space all round the table.2Cut all components to sizeCut legs, rails and tabletop planks to the listed lengths.3Sand all componentsSand before assembly with grit 80 then 120.4Build the leg framesBolt the cross rails to the legs with M10 bolts.5Connect the framesJoin with side rails and check that the diagonals are equal.6Fit the tabletopPlace the 7 planks with 5–8 mm spacing and pre-drill.7Treat and finishApply two coats, including the underside and the legs.
Work order for a rectangular wooden garden table (180×90 cm), summarised from the step-by-step guide in this article.

Step 1: Create your design

Decide on the size based on how many people you want to seat and how much space you have on the terrace. Allow at least 80–90 cm of clear space all round the table for chairs and movement.

Sketch the design: legs, cross rails, side rails, and the tabletop.

Step 2: Cut all components to size

Cut or order to size:

Tip: have the long planks cut to length at the timber merchant for accurate, straight cuts.

Step 3: Sand all components

Sand all components before assembly (grit 80 → 120). Round off the top edges of the tabletop planks — this prevents splinters during use.

Step 4: Build the leg frames

Attach the cross rails to the legs. Use M10 bolts for the joints: drill through the leg and cross rail, insert the bolt, secure with washer and nut.

Build two identical frames (front and back). Check that the frames are level and have right-angle corners.

Step 5: Connect the frames

Connect the two frames with the two side rails. Use bolts or heavy-duty stainless steel screws (5×100 mm). Check squareness by measuring the diagonals — they must be equal.

Optionally add a diagonal cross brace between the legs if the table is long (>160 cm). This gives extra rigidity.

Step 6: Fit the tabletop

Place the 7 planks on the support rails with 5–8 mm spacing. Distribute the planks evenly. Screw each plank to each support rail with 2 screws (pre-drill the holes!).

Tip: start with the two outer planks on each side, then the middle plank, then the planks in between. This way you can distribute the spacing evenly.

Tabletop overhang: let the tabletop overhang the legs by 15–20 cm at the short ends. The overhang on the long sides is already built into the construction.

Step 7: Treat and finish

Treat the table before use. Choose from:

Apply two coats, including the underside of the tabletop and the legs. Leave to dry thoroughly.

Choosing the right timber for outdoors

Timber Durability Maintenance Price
Douglas fir Good (Class 2–3) Oil every 2 years €4 – €7/m
Larch Good (Class 2) Every 2 years €5 – €8/m
Oak Very good (Class 2) Minimal €8 – €15/m
Teak Excellent Oil annually €15 – €30/m
Pressure-treated pine Moderate Stain annually €2 – €4/m

Recommendation: for the best value for money, choose Douglas fir or larch. Both are naturally weather-resistant and will last 15–20 years with minimal maintenance.

Variations

Slatted tabletop

Instead of wide planks (28×140 mm), use narrow slats (22×70 mm or 22×90 mm) with wider spacing. This gives a more modern, lighter look and is better for drainage.

Table with steel legs

Combine a wooden tabletop with industrial steel legs. This is a popular industrial design look. Steel legs are available from metal suppliers or online (€80–€150 per set) or can be welded by a metalworker.

Extending garden table

More challenging but possible for experienced DIYers. Use an extending mechanism (butterfly table mechanism) for a table that can grow larger for bigger gatherings.

Common mistakes

  1. Legs not exactly square. Always use a set square when building the leg frame.
  2. Tabletop planks without gaps. Without space between the planks, puddles form on the table after rain.
  3. Forgetting stainless steel screws. Standard screws rust — use stainless steel exclusively for outdoor projects.
  4. Not pre-drilling holes. The result is splitting at the screws — always pre-drill.

Frequently asked questions

How do I protect a wooden garden table from rain?

Treat the table with wood oil or exterior stain. Fit a protective cover when the table is not in use for extended periods. Store the table in a dry space over winter for the longest lifespan.

Which wood is best for a garden table?

Douglas fir, larch, or oak are the best choices for an outdoor table. Pressure-treated pine is cheaper but needs annual maintenance. Avoid untreated pine — it greys and splits quickly.


Ready to start building with professional plans? At fredsdiyplans.com you’ll find building plans for all your wood projects, complete with material lists and step-by-step instructions.


Ready to get started? Browse thousands of step-by-step plans at fredsdiyplans.com.

Leave a Reply

Your email address will not be published. Required fields are marked *